How to service the rear bumper cover on 2007 Ford Freestyle?

The service procedure for the Freestyle rear bumper cover begins with rear lamp removal then disconnecting the rear parking aid electrical connector when present. Open the liftgate to access five rear bumper cover scrivets at the opening then remove the two pin-type retainers at the beam base. Uninstall the two bolts which bind the bumper cover to the mounting reinforcements. For proper bumper cover detachment from the body, users need to gently lift the rear cover while keeping it at the forward outboard area. Check the mounting reinforcements for damage when the bumper cover is removed. Replace them if any damage exists. The installation process should be completed by performing the opposite steps used during the removal task.

OEM 2007 Ford Freestyle Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumpers found

View related parts
2007 Ford Freestyle Impact Bar, Front
Part Number: 8F9Z-17757-A
$228.11 MSRP: $315.56
You Save: $87.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Manufacturer Note: Impact Bar - Steel
- Position: Front
- Replaces: 5F9Z-17757-AA
- Base No.: 17757
- Item Weight: 16.50 Pounds
- Item Dimensions: 6.4 x 58.0 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestyle Submodels:
- Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
2007 Ford Freestyle Lower Cover, Rear
Part Number: 6F9Z-17K835-AAPTM
$233.94 MSRP: $320.96
You Save: $87.02 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Valance Panel, Rear
- Position: Rear
- Replaces: 5F9Z-17K835-AAB
- Base No.: 17K835
- Item Weight: 26.10 Pounds
- Item Dimensions: 68.8 x 25.7 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F9Z-17K835-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestyle Submodels:
- Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
2007 Ford Freestyle Impact Bar, Rear
Part Number: 5F9Z-17906-AA
$154.53 MSRP: $213.78
You Save: $59.25 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Base No.: 17906
- Item Weight: 37.60 Pounds
- Item Dimensions: 51.0 x 5.3 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestyle Submodels:
- Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
2007 Ford Freestyle Lower Cover, Rear
Part Number: 6F9Z-17K835-BAPTM
$251.75 MSRP: $345.40
You Save: $93.65 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover; Valance Panel, Rear
- Position: Rear
- Replaces: 5F9Z-17K835-BAB
- Base No.: 17K835
- Item Weight: 21.80 Pounds
- Item Dimensions: 73.8 x 16.9 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F9Z-17K835-BAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestyle Submodels:
- Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
2007 Ford Freestyle Lower Cover, Front
Part Number: 5F9Z-17D957-BAC
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front Lower
- Position: Front Lower
- Base No.: 17D957B
- Item Weight: 15.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-17D957-BAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestyle Submodels:
- Limited, SEL | 6 Cyl 3.0 L GAS
View related parts
2007 Ford Freestyle Bumper Cover, Rear Upper
Part Number: 5F9Z-17F881-AAA
$236.30 MSRP: $346.98
You Save: $110.68 (32%)
Product Specifications
- Other Name: Bumper Cover, Rear; Bumper - Cover
- Position: Rear Upper
- Base No.: 17F881
- Item Weight: 16.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-17F881-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestyle Submodels:
- Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
2007 Ford Freestyle Bumper Cover, Front Upper
Part Number: 5F9Z-17D957-AAC
$235.16 MSRP: $345.32
You Save: $110.16 (32%)
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front Upper
- Base No.: 17D957A
- Item Weight: 10.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-17D957-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestyle Submodels:
- Limited, SE, SEL | 6 Cyl 3.0 L GAS

2007 Ford Freestyle Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestyle Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestyle Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestyle Bumper Parts Questions & Experts Answers

Q: How to service the rear bumper cover on 2007 Ford Freestyle?
A: The service procedure for the Freestyle rear bumper cover begins with rear lamp removal then disconnecting the rear parking aid electrical connector when present. Open the liftgate to access five rear bumper cover scrivets at the opening then remove the two pin-type retainers at the beam base. Uninstall the two bolts which bind the bumper cover to the mounting reinforcements. For proper bumper cover detachment from the body, users need to gently lift the rear cover while keeping it at the forward outboard area. Check the mounting reinforcements for damage when the bumper cover is removed. Replace them if any damage exists. The installation process should be completed by performing the opposite steps used during the removal task.