How to service and repair the front bumper cover on Ford Freestyle?

The service process for the Freestyle front bumper cover starts with removing its 2 bumper cover scrivets together with its 2 bolts. Things start with removing the 3 lower retainers on the front bumper cover along with freeing the 6 wheel lip molding scrivets from both right-hand and left-hand wheel lip moldings. Disconnection of fog lamp electrical connections is necessary when these features are installed on the vehicle. You should remove the 6 front bumper cover nuts before starting installation while tightening each nut to 7 Nm (62 lb-in). Remove the bumper cover front by first releasing the left-hand and right-hand wheel molding tabs. Reinstallation of the new or fixed bumper cover follows the steps used for removal.

How to service the rear bumper cover on Ford Freestyle?

You need to start bumper service on the Freestyle by taking out the rear lamps and then separating the rear parking aid connector if your car has it. First remove the five rear bumper cover scrivets which reside under the liftgate opening then detach the two pin-type retainers from the beam bottom surface. The two bolts holding the bumper cover to its mounting reinforcements need to be removed. The rear bumper cover should slightly lift before the separation occurs at the forward outboard attachment area with the vehicle body. Check the mounting reinforcements for damage before moving forward with the repairs since damage will require replacements. The installation process ends by performing the reverse actions which were used for removal.

OEM Ford Freestyle Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Bumpers found

View related parts
Ford Freestyle Impact Bar, Front Part Number: 8F9Z-17757-A
$228.11 MSRP: $315.56
You Save: $87.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Manufacturer Note: Impact Bar - Steel
- Position: Front
- Replaces: 5F9Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Lower Cover, Rear Part Number: 6F9Z-17K835-AAPTM
$233.94 MSRP: $320.96
You Save: $87.02 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Valance Panel, Rear
- Position: Rear
- Replaces: 5F9Z-17K835-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Impact Bar, Rear Part Number: 5F9Z-17906-AA
$154.53 MSRP: $213.78
You Save: $59.25 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Lower Cover, Front Part Number: 5F9Z-17D957-AAD
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front Lower
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Freestyle | SE | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Lower Cover, Rear Part Number: 6F9Z-17K835-BAPTM
Product Specifications
- Other Name: Cover; Valance Panel, Rear
- Position: Rear
- Replaces: 5F9Z-17K835-BAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Lower Cover, Front Part Number: 5F9Z-17D957-BAC
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front Lower
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Bumper Cover, Rear Upper Part Number: 5F9Z-17F881-AAA
$236.30 MSRP: $346.98
You Save: $110.68 (32%)
Product Specifications
- Other Name: Bumper Cover, Rear; Bumper - Cover
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Freestyle Bumper Cover, Front Upper Part Number: 5F9Z-17D957-AAC
$235.16 MSRP: $345.32
You Save: $110.16 (32%)
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Freestyle | Limited, SE, SEL | 6 Cyl 3.0 L GAS

Ford Freestyle Bumper

OEM Bumper boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Bumper with long life and a perfect fit. Come to our website and find genuine Ford Freestyle parts. We keep a wide inventory of OEM Freestyle parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Freestyle Bumper Parts and Q&A

Bumper Cover, Front Upper
5F9Z-17D957-AAC
Q: How to service and repair the front bumper cover on Ford Freestyle?
A:
The service process for the Freestyle front bumper cover starts with removing its 2 bumper cover scrivets together with its 2 bolts. Things start with removing the 3 lower retainers on the front bumper cover along with freeing the 6 wheel lip molding scrivets from both right-hand and left-hand wheel lip moldings. Disconnection of fog lamp electrical connections is necessary when these features are installed on the vehicle. You should remove the 6 front bumper cover nuts before starting installation while tightening each nut to 7 Nm (62 lb-in). Remove the bumper cover front by first releasing the left-hand and right-hand wheel molding tabs. Reinstallation of the new or fixed bumper cover follows the steps used for removal.
Lower Cover, Rear
6F9Z-17K835-AAPTM
Q: How to service the rear bumper cover on Ford Freestyle?
A:
You need to start bumper service on the Freestyle by taking out the rear lamps and then separating the rear parking aid connector if your car has it. First remove the five rear bumper cover scrivets which reside under the liftgate opening then detach the two pin-type retainers from the beam bottom surface. The two bolts holding the bumper cover to its mounting reinforcements need to be removed. The rear bumper cover should slightly lift before the separation occurs at the forward outboard attachment area with the vehicle body. Check the mounting reinforcements for damage before moving forward with the repairs since damage will require replacements. The installation process ends by performing the reverse actions which were used for removal.