FordParts
My Garage
My Account
Cart
OEM 2007 Ford Freestyle Door Latch Assembly
Door Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Door Latch Assemblys found
2007 Ford Freestyle Lock Actuator, Rear Passenger Side
Part Number: 6L2Z-78218A42-B$9.94 MSRP: $15.38You Save: $5.44 (36%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Actuator Assembly; Door Lock Actuator Motor, Front Right, Rear Right; Door Latch Assembly.; Actuator
- Position: Rear Passenger Side
- Replaces: 4L2Z-78218A42-AB, 6L2Z-78218A42-A, 6L2Z-78218A42-AA, 6L2Z-78218A42-AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-78218A42-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle Lock Actuator, Front Driver Side
Part Number: 6L2Z-78218A43-B$12.10 MSRP: $18.73You Save: $6.63 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Actuator Assembly; Door Lock Actuator Motor, Front Left, Rear Left; Door Latch Assembly.; Actuator
- Position: Front Driver Side
- Replaces: 4L2Z-78218A43-AA, 6L2Z-78218A43-AB, 6L2Z-78218A43-A, 6L2Z-78218A43-AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-78218A43-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle Lock Assembly, Front Driver Side
Part Number: 8F9Z-5421813-A$41.39 MSRP: $59.22You Save: $17.83 (31%)Product Specifications- Other Name: Latch; Door Latch Assembly, Front Left; Door Lock; Lock; Door Latch Assembly
- Position: Front Driver Side
- Base No.: <21812
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.2 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-5421813-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Latch; Door Latch Assembly, Front Right; Door Lock; Lock; Door Latch Assembly
- Manufacturer Note: Includes Door Ajar Switch
- Position: Front Passenger Side
- Replaces: 7F9Z-5421812-A, 6F9Z-5421812-A, 6F9Z-5421812-B
- Base No.: <21812
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.4 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-5421812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Latch; Door Latch Assembly; Door Lock
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-74264B53-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Latch; Door Latch Assembly; Door Lock
- Position: Passenger Side
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-74264B52-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Control; Door Latch Assembly, Front Left; Door Lock; Latch Assembly Latch; Door Latch Assembly
- Position: Front Driver Side
- Base No.: <219A64
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F9Z-74219A65-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Control; Door Latch Assembly, Front Right; Door Lock; Latch Assembly Latch; Door Latch Assembly
- Position: Front Passenger Side
- Base No.: <219A64
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6F9Z-74219A64-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Freestyle Door Latch Assembly
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestyle Door Latch Assembly available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestyle Door Latch Assembly as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Freestyle Door Latch Assembly Parts Questions & Experts Answers
- Q: How to service and repair the front Door Latch Assembly on 2007 Ford Freestyle?A: You should start front door latch service work by taking out the interior trim panel and bolt on the front door before setting the handle aside. The procedure starts by placing the watershield aside and then disconnecting external mirror electrical connectors and keyless entry keypad cables and front door disarm switch electrical connector cables. The service requires you to first push the door module's wiring harness grommet and only then reconnect the electrical connectors for both window regulator and window switch. Maintaining proper access to clamp bolts requires positioning the window to an appropriate angle. Disconnect both wiring connectors which control the window regulator and window switch. Next untighten the two window glass clamp bolts before using tape to keep the window in an upright position. The front door lock cylinder pawl must be extracted from the actuating rod after removing the door lock cylinder circlip to set aside the lock cylinder rod and pawl when the vehicle has this equipment. You will open the yellow clip to release the exterior door handle actuating rod from the front door latch before disassembly and bolt removal of three front door latch bolts and eleven bolts required for the door module re-positioning. The door ajar switch and door lock actuator electrical connectors need to be separated before disconnecting the push button rod from the front door latch. Remove the remote cable cover from the latch before taking out the front door latch from the bracket while releasing the interior door handle cable from its corresponding latch position. The installation steps demand you to mount the door disarm switch together with the door lock cylinder pawl onto the door lock cylinder followed by attaching the circlip. The front door latch requires placement on the bracket while you link the interior door handle cable to the latch before adding the remote cable cover on the latch. Loop the push button rod into the front door latch before attaching both the door ajar switch and door lock actuator electrical wires. The door module should be positioned first and eleven bolts installed and tightened to 8 Nm (71 lb-in) then the three front door latch bolts tightened to 12 Nm (9 lb-ft). After making certain the exterior door handle and door latch meet specifications the worker should connect the exterior door handle actuating rod to the yellow clip while keeping the rod free to avoid incorrect adjustments. Install the exterior door handle actuating rod to the front door latch then dispose of the yellow clip. To install the front door lock cylinder actuating rod connect it to the front door lock cylinder pawl while also installing both window glass clamp bolts and position the window in the clamps for shifting door window glass fully rearward followed by tightening it to 8 Nm (71 lb-in). Open the wiring harness grommet to direct it into the door module and then join all available electrical connectors between the keyless entry keypad and front door disarm switch and exterior mirror if equipped. After watershield installation users should position the interior door handle while installing the bolt in a loose manner. You should complete the task by placing the front door interior trim panel before you align the inside door handle pins to match their position in the front door trim panel. Install the interior door handle bolt with 7 Nm (62 lb-in) torque.
Related 2007 Ford Freestyle Parts
2007 Ford Freestyle Door Check
2007 Ford Freestyle Door Latch Cable
2007 Ford Freestyle Door Lock
2007 Ford Freestyle Door Lock Actuator Motor
2007 Ford Freestyle Door Lock Actuators
2007 Ford Freestyle Door Moldings
2007 Ford Freestyle Door Seal
2007 Ford Freestyle Power Window Motor
2007 Ford Freestyle Rear Door Striker
2007 Ford Freestyle Rear Passenger Door Handle Latch
2007 Ford Freestyle Weather Strip
2007 Ford Freestyle Window Run