Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 8F9Z-5421812-A
Lock Assembly, Front Passenger Side

2005-2009 Ford 8F9Z5421812A

Customer Questions & Expert Answers (11)
Ford 8F9Z-5421812-A Lock Assembly, Front Passenger Side
  • Part Description
    Latch; Door Latch Assembly, Front Right; Door Lock
  • Base No.
    <21812
  • Position
    Front Passenger Side
  • Replaces
    7F9Z-5421812-A, 6F9Z-5421812-A, 6F9Z-5421812-B
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 8F9Z-5421812-A Lock Assembly, Front Passenger Side is Ref No. 9 in the diagram below

    2008 Ford Taurus X Lock Assembly, Front Passenger Side Diagram for 8F9Z-5421812-A
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 8F9Z-5421812-A

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Ford Five HundredLimited, SE, SEL6 Cyl 3.0 L GAS
    2005-2007 Ford FreestyleLimited, SE, SEL6 Cyl 3.0 L GAS
    2008-2009 Ford TaurusLimited, SE, SEL6 Cyl 3.5 L GAS
    2008-2009 Ford Taurus XEddie Bauer, Limited, SEL6 Cyl 3.5 L GAS
    2005-2007 Mercury MontegoLuxury, Premier6 Cyl 3.0 L GAS
    2008-2009 Mercury SableBase, Premier6 Cyl 3.5 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Will this 8F9Z-5421812-A work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 8F9Z-5421812-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What steps are involved in securing the window for the 2006 Mercury Montego? Posted by Customer
    A:
    If equipped, connect the front door lock cylinder actuating rod to the front door lock cylinder pawl, tighten the two window glass clamp bolts, position the window in both clamps, and shift the door window glass fully rearward, tightening the two window glass bolts to 8 Nm (71 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What electrical connectors need to be disconnected for the 2005 Ford Five Hundred? Posted by Customer
    A:
    Disconnect the door ajar switch and door lock actuator electrical connectors, and the push button rod from the front door latch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the last step regarding the window glass for the 2006 Ford Five Hundred? Posted by Customer
    A:
    Untape the window glass, lower it, and tighten the window glass clamp bolt, ensuring the window is positioned correctly in the clamp and fully forward.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after removing the trim panel for the 2008 Ford Taurus X? Posted by Customer
    A:
    Reconnect the window regulator and window switch electrical connectors, then position the rear door window to access the glass clamp bolt.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to service and repair the rear door latch for the 2005 Ford Freestyle? Posted by Customer
    A:
    Begin by removing the rear door window glass.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What are the final steps for reassembling the door for the 2009 Ford Taurus? Posted by Customer
    A:
    Install the access hole watershield and the rear door trim panel, centering the inside door handle alignment pins to the rear door trim panel before installing the interior door handle bolt, tightened to 7 Nm (62 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the torque specification for the door module and latch bolts for the 2007 Ford Freestyle? Posted by Customer
    A:
    Position the door module and install the eleven bolts, tightening them to 8 Nm (71 lb-in), followed by the installation of the three front door latch bolts, which should be tightened to 12 Nm (9 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step regarding the interior door handle for the 2009 Ford Taurus? Posted by Customer
    A:
    Center the interior door handle alignment pins to the front door trim panel and tighten the interior door handle bolt to 7 Nm (62 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you disconnect the exterior door handle actuating rod for the 2007 Mercury Montego? Posted by Customer
    A:
    Disconnect the exterior door handle actuating rod from the rear door latch, remove the three rear door latch bolts, and take out the rear door latch assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you access the window glass clamp bolts for the 2008 Mercury Sable? Posted by Customer
    A:
    Push the wiring harness grommet through the door module, then connect the window regulator and window switch electrical connectors to position the front door window for access.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Door Latch Assembly
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Lock Assembly, Front Passenger Side 8F9Z-5421812-A Designed for Proper Fit and Performance

The Ford part 8F9Z-5421812-A Lock Assembly, Front Passenger Side as a genuine Ford Door Latch Assembly component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 8F9Z-5421812-A Lock Assembly, Front Passenger Side is used with Ford Taurus, Five Hundred, Freestyle vehicles and Mercury Montego, Sable models. The original Ford part will bear the manufacturer part number: 8F9Z-5421812-A and where it is made at Ford. It has been specifically developed to fit the Front Passenger Side and has the code: <21812.
This component has dimensions of 6.4 x 4.5 x 4.5 inches and its weight is approximately 1.20 Pounds. The part 8F9Z5421812A is available in New condition while meeting the standards of the product rating. The Latch; Door Latch Assembly, Front Right; Door Lock belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 8F9Z-5421812-A can be known as Lock; Door Latch Assembly, and it replaces 7F9Z-5421812-A, 6F9Z-5421812-A, 6F9Z-5421812-B. The inventory reference for this item is SKU: 8F9Z-5421812-A. Additional manufacturer-provided details include: Includes Door Ajar Switch. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.