How to service and repair the brake light switch on 2007 Ford Fusion?

The brake light switch service necessitates first detaching the electrical connection from the stoplamp switch assembly. You should turn the stoplamp switch clockwise by 45 degrees while rotating it carefully as any brake pedal pressure at this time might damage the switch. Users cannot activate the brake pedal when installing the stoplamp switch because it contains a self-adjusting mechanism. Installation of the stoplamp switch can only be adjusted once during its initial setup but replacement with a new stoplamp switch becomes necessary for additional adjustments. The hardware installation will end when the reversal of removal steps is finished.

OEM 2007 Ford Fusion Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2007 Ford Fusion Stoplamp Switch Part Number: 7E5Z-13480-A
$39.71 MSRP: $63.05
You Save: $23.34 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch
- Replaces: 6E5Z-13480-A
- Base No.: 13480
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-13480-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Fusion Submodels:
- S, SE, SEL | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2007 Ford Fusion Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Fusion Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Fusion Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Fusion Brake Light Switch Parts Q&A

Q: How to service and repair the brake light switch on 2007 Ford Fusion?
A: The brake light switch service necessitates first detaching the electrical connection from the stoplamp switch assembly. You should turn the stoplamp switch clockwise by 45 degrees while rotating it carefully as any brake pedal pressure at this time might damage the switch. Users cannot activate the brake pedal when installing the stoplamp switch because it contains a self-adjusting mechanism. Installation of the stoplamp switch can only be adjusted once during its initial setup but replacement with a new stoplamp switch becomes necessary for additional adjustments. The hardware installation will end when the reversal of removal steps is finished.