How to service the MAP Sensor on 2007 Ford Fusion?

To service the MAP sensor, disconnect the electrical connector and remove the securing bolt to take out the sensor. Install the new sensor, tightening the bolt to 6 Nm (53 lb-in). If torque is insufficient, use the auxiliary bolt hole. Clean the sealing surface before reinstalling.

OEM 2007 Ford Fusion MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2007 Ford Fusion M.A.P. Sensor Part Number: 1S7Z-9F479-AD
$76.02 MSRP: $125.09
You Save: $49.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Manifold Absolute Pressure Sensor; Manifold Sensor; Map Sensor; Sensor; Pressure Sensor
- Replaces: 1S7Z-9F479-AA, 4S4Z-9F479-AA, CX-1976, 1S7Z-9F479-AC, CX-2559
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-9F479-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Fusion Submodels:
- Energi Platinum, Energi SE, Energi Titanium, Hybrid, Platinum, Platinum Hybrid, S, S Hybrid, SE, SE Hybrid, SEL, SEL Hybrid, Sport, Titanium, Titanium Hybrid | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 2.7 L GAS
View related parts
2007 Ford Fusion M.A.P. Sensor Part Number: 6E5Z-9F479-BA
Product Specifications
- Other Name: Sensor Assembly; Manifold Absolute Pressure Sensor; MAP Sensor; Pressure Sensor
- Replaces: 6E5Z-9F942-BA
- Base No.: 9F479
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-9F479-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Fusion Submodels:
- SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2007 Ford Fusion MAP Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Fusion MAP Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Fusion MAP Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Fusion MAP Sensor Parts Q&A

Q: How to service the MAP Sensor on 2007 Ford Fusion?
A: To service the MAP sensor, disconnect the electrical connector and remove the securing bolt to take out the sensor. Install the new sensor, tightening the bolt to 6 Nm (53 lb-in). If torque is insufficient, use the auxiliary bolt hole. Clean the sealing surface before reinstalling.