FordParts
My Garage
My Account
Cart
OEM 2007 Ford Mustang Axle Shaft
Car Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Axle Shafts found
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shaft Assembly; Axle Shaft
- Position: Rear Driver Side
- Base No.: 4238
- Item Weight: 23.00 Pounds
- Item Dimensions: 36.7 x 8.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Right; Axle Shaft Assembly; Axle Shaft
- Position: Rear Passenger Side
- Base No.: 4238
- Item Weight: 25.10 Pounds
- Item Dimensions: 41.2 x 8.3 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shaft Assembly; Axle Shaft
- Position: Rear Driver Side
- Base No.: 4238
- Item Weight: 22.60 Pounds
- Item Dimensions: 38.0 x 7.6 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Right; Axle Shaft Assembly; Axle Shaft
- Position: Rear Passenger Side
- Base No.: 4238
- Item Weight: 23.30 Pounds
- Item Dimensions: 37.6 x 7.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Right; Axle Shaft Assembly; Axle Shaft
- Position: Rear Passenger Side
- Replaces: 5R3Z-4234-DA
- Base No.: 4238
- Item Weight: 23.50 Pounds
- Item Dimensions: 37.3 x 7.6 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Shaft Assembly - Rear Axle; Drive Axle Shaft, Rear Left; Axle Shaft Assembly; Axle Shaft
- Position: Rear Driver Side
- Replaces: 5R3Z-4234-DB
- Base No.: 4238
- Item Weight: 23.40 Pounds
- Item Dimensions: 36.9 x 7.5 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-4234-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Mustang Axle Shaft
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang Axle Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang Axle Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Mustang Axle Shaft Parts Q&A
- Q: How to Service and Repair the Rear Axle Shaft and Differential of a 7.5-Inch Ring Gear on 2007 Ford Mustang?A: Service and repair operations of the Ford 7.5-inch ring gear rear drive axle and differential should start by putting the vehicle into neutral and hoisting it. You should first remove the wheel with its tire and then detach the differential housing cover. The service commences by disassembling the two disc brake caliper bolts before hanging the caliper using mechanic's wire support. Proceed by taking out the disc brake pads before disassembling the two disc brake caliper anchor bolts and anchor and brake disc. Prior to taking out the differential pinion shaft it is essential to remove the bolt on the rear brake anti-lock sensor together with the sensor itself before proceeding. Proceed with removing the axle shaft U-washer by disconnecting it carefully while preserving the rubber O-ring inside its grooves and extract the axle shaft retaining the oil seal. Apply grease to the lip of the new axle shaft oil seal before putting in the axle shaft but protect the seal from damage during installation. You should place the U-washer on the buttoned end of the axle shaft then carefully extend the shaft outward to complete installation. You must apply threadlock and sealer to the old differential pinion shaft lock bolt threads using the available ones. Then install the differential pinion shaft while aligning it with the differential case lock bolt hole. Finally, tighten a new lock bolt to 30 Nm (22 ft. lbs). High temperature nickel anti-seize lubricant should be applied for installing the anti-lock sensor bolt and both pieces while setting torque to 7 Nm (62 inch lbs). Once the technician reattaches the brake disc they should proceed to install the disc brake caliper anchor along with its two bolts until they reach 103 Nm of torque (76 ft. lbs). The following installation step includes putting in disc brake pads followed by the disc brake caliper and its two bolts which need a torque setting of 33 Nm (24 ft. lbs). The procedure ends with installing the differential housing cover after reinstalling the tire and wheel assembly.
Related 2007 Ford Mustang Parts
2007 Ford Mustang Control Arm
2007 Ford Mustang Coil Springs
2007 Ford Mustang Coil Spring Insulator
2007 Ford Mustang Control Arm Bushing
2007 Ford Mustang Shock Absorber
2007 Ford Mustang Shock And Strut Mount
2007 Ford Mustang Sway Bar Bushing
2007 Ford Mustang Sway Bar Kit
2007 Ford Mustang Sway Bar Link
2007 Ford Mustang Trailing Arm Bushing
2007 Ford Mustang Wheel Seal
2007 Ford Mustang Wheel Stud