How to service the shock absorber on 2007 Ford Mustang?

Start the shock absorber service by opening the luggage compartment then shifting the carpet out of the way. If the vehicle stands level place a mark on the rear shock absorber that will stay in position against the protective sleeve. The vehicle should be placed on a hoist and positioned in neutral gear but you need to avoid suspending the rear axle at the differential housing or allowing the control arms to support the weight alone because this may damage their bushings. Place two properly fitted jack stands underneath the rear axle for support. Replace the shock absorber upper nut together with washer and insulator assembly by installing new parts while tightening them to 40 Nm (30 ft. lbs). The shock absorber's mark on its sleeve must align with the protective sleeve while raising the rear axle. The installation process for vehicles with rear stabilizer bars requires replacement and disposal of both link bolts and clip nuts followed by new ones that you should tighten to 115 Nm (85 ft. lbs). You must position the stabilizer bar to access the shock absorber lower bolt before removing both the lower bolt and nut to take out the shock absorber. The installation of the new shock absorber requires the lower bolt to be tightened to 115 Nm (85 ft. lbs) at curb height. End the installation by following the reverse order of steps used for removal.

OEM 2007 Ford Mustang Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shock Absorbers found

View related parts
2007 Ford Mustang Strut, Front Part Number: AR3Z-18124-D
$142.67 MSRP: $234.75
You Save: $92.08 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Front Suspension Strut Kit; Complete Strut Set.; Shock Absorber
- Manufacturer Note: Fits Both LH & RH Sides
- Position: Front
- Replaces: 6R3Z-18124-EA, 7R3Z-18124-B, 7R3Z-18124-GB, 9R3Z-18124-J, AST-383, ASH-1167, AST-169, 9R3Z-18124-B, ASH-12155, AST-386, ASH-1028, 6R3Z-18124-BA, 7R3Z-18124-E, 9R3Z-18124-F, AR3Z-18124-E, AST-446, AST-451, ASH-1054, AR3Z-18124-B, AR3Z-18124-G, 8R3Z-18124-J, 9R3Z-18124-E, 7R3Z-18124-GA, ASH-1031, AST-447, ASH-1106, AST-450
- Base No.: 18124
- Item Weight: 15.20 Pounds
- Item Dimensions: 31.9 x 7.5 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: AR3Z-18124-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Shock Absorber, Rear Part Number: 7R3Z-18125-L
$62.16 MSRP: $104.36
You Save: $42.20 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 4R3Z-18125-CA, 6R3Z-18125-CA, 6R3Z-18125-FA, 6R3Z-18125-DA, 7R3Z-18125-HA, 6R3Z-18125-C, AR3Z-18125-G, AST-173, AST-416, 6R3Z-18125-MA, ASH-1057, AST-224
- Base No.: 18125
- Item Weight: 5.00 Pounds
- Item Dimensions: 19.7 x 3.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7R3Z-18125-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, GT, Shelby GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Shock Absorber, Rear Part Number: 7R3Z-18125-J
$69.31 MSRP: $116.36
You Save: $47.05 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Position: Rear
- Base No.: 18125
- Item Weight: 4.90 Pounds
- Item Dimensions: 19.5 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7R3Z-18125-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2007 Ford Mustang Shock Absorber, Rear Part Number: 6R3Z-18125-LA
$70.72 MSRP: $116.36
You Save: $45.64 (40%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 4R3Z-18125-BA, 6R3Z-18125-GA, 6R3Z-18125-EA, 7R3Z-18125-M, ASH-412, ASH-1168, AST-263, AST-172, 6R3Z-18125-BA, 8R3Z-18125-J, 6R3Z-18125-B, 7R3Z-18125-GA, AR3Z-18125-B, ASH-1056, 7R3Z-18125-GB, ASH-1108, ASH-12156
- Base No.: 18125
- Item Weight: 4.60 Pounds
- Item Dimensions: 19.2 x 3.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6R3Z-18125-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Shock Absorber, Rear Part Number: 7R3Z-18125-K
$133.97 MSRP: $212.73
You Save: $78.76 (38%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Position: Rear
- Base No.: 18125
- Item Weight: 4.60 Pounds
- Item Dimensions: 19.5 x 2.8 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7R3Z-18125-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base | 6 Cyl 4.0 L GAS
View related parts
2007 Ford Mustang Strut, Front Part Number: 9R3Z-18124-C
$146.97 MSRP: $241.82
You Save: $94.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Front Suspension Strut Kit; Complete Strut Set.; Shock Absorber
- Position: Front
- Replaces: 6R3Z-18124-CA, 6R3Z-18124-FA, 7R3Z-18124-C, 9R3Z-18124-H, 7R3Z-18124-HB, 9R3Z-18124-D, AR3Z-18124-F, ASH-1055, ASH-1112, ASH-1107, AST-170, AST-387, AR3Z-18124-C, ASH-1246, 7R3Z-18124-J, 7R3Z-18124-F, 7R3Z-18124-D, ASH-1032, AST-449, AST-384, 7R3Z-18124-HA
- Base No.: 18124
- Item Weight: 14.70 Pounds
- Item Dimensions: 31.6 x 7.5 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9R3Z-18124-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Strut, Front Part Number: 9R3Z-18124-G
$109.38 MSRP: $183.64
You Save: $74.26 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Front Suspension Strut Kit; Complete Strut Set.; Shock Absorber
- Position: Front
- Replaces: 7R3Z-18124-A, 6R3Z-18124-AA
- Base No.: 18124
- Item Weight: 14.60 Pounds
- Item Dimensions: 31.9 x 7.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9R3Z-18124-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2007 Ford Mustang Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Mustang Shock Absorber Parts Q&A

Q: How to service the shock absorber on 2007 Ford Mustang?
A: Start the shock absorber service by opening the luggage compartment then shifting the carpet out of the way. If the vehicle stands level place a mark on the rear shock absorber that will stay in position against the protective sleeve. The vehicle should be placed on a hoist and positioned in neutral gear but you need to avoid suspending the rear axle at the differential housing or allowing the control arms to support the weight alone because this may damage their bushings. Place two properly fitted jack stands underneath the rear axle for support. Replace the shock absorber upper nut together with washer and insulator assembly by installing new parts while tightening them to 40 Nm (30 ft. lbs). The shock absorber's mark on its sleeve must align with the protective sleeve while raising the rear axle. The installation process for vehicles with rear stabilizer bars requires replacement and disposal of both link bolts and clip nuts followed by new ones that you should tighten to 115 Nm (85 ft. lbs). You must position the stabilizer bar to access the shock absorber lower bolt before removing both the lower bolt and nut to take out the shock absorber. The installation of the new shock absorber requires the lower bolt to be tightened to 115 Nm (85 ft. lbs) at curb height. End the installation by following the reverse order of steps used for removal.