How to service the Cooling Hose for the coolant bypass on a 2.3L engine on 2007 Ford Ranger?

A technician needs to drain the cooling system before performing work on the coolant bypass hose of cars equipped with a 2.3L engine. Service the coolant bypass hose by first unclipping it from its route and then separating it from the bypass tube. A manual transmission vehicle requires users to remove the shifter before beginning work. Rear driveshaft removal should follow the procedure of disconnecting the catalytic converter-to-muffler bolts before tightening them to 40 Nm (30 ft. lbs) during reinstallation. You should start by removing the exhaust manifold-to-catalytic converter bolts and then taking out the catalytic converter while tightening these bolts to 40 Nm (30 ft. lbs) when reinstalling them. The installation requires a transmission jack to hold the transmission while the six bolts (three per side) that secure the crossmember to the frame need removal until torques reach 101 Nm (74 ft lbs). The crossmember installation requires detachment of the transmission electrical connector and removal of the transmission mount nuts while fastening the mount nuts to 99 Nm (73 ft. lbs) for reattachment. Lower the transmission to reach the coolant bypass hose. Detach the hose from the rear coolant outlet pipe before removing it. The service completion demands the reverse order of removal steps.

OEM 2007 Ford Ranger Cooling Hose

Cooling System Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Cooling Hoses found

View related parts
2007 Ford Ranger Lower Hose
Part Number: 7L5Z-8286-A
$33.43 MSRP: $53.09
You Save: $19.66 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Radiator; Radiator Coolant Hose, Lower; Multi Purpose Hose; Radiator Hose; Cooling Hose; Radiator Coolant Hose; Coolant Hose
- Manufacturer Note: Less Hose Clamps
- Position: Lower
- Base No.: 8286
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.8 x 3.8 x 15.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-8286-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Upper Hose
Part Number: 4L5Z-8260-BA
$31.14 MSRP: $49.45
You Save: $18.31 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Radiator; Radiator Coolant Hose, Upper; Multi Purpose Hose; Radiator Hose; Cooling Hose; Radiator Coolant Hose; Coolant Hose
- Position: Upper
- Base No.: 8260
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 13.5 x 15.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-8260-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Lower Hose
Part Number: JL5Z-8286-B
$63.79 MSRP: $104.96
You Save: $41.17 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Radiator; Radiator Coolant Hose, Lower; Multi Purpose Hose; Radiator Hose; Cooling Hose
- Position: Lower
- Replaces: 2L5Z-8286-AA, 2L5Z-8286-AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.5 x 18.2 x 14.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: JL5Z-8286-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, Splash, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Ranger Upper Hose
Part Number: 7L5Z-8260-A
$25.58 MSRP: $41.27
You Save: $15.69 (39%)
ADD TO CART
Product Specifications
- Other Name: Hose - Radiator; Radiator Coolant Hose, Upper; Multi Purpose Hose; Radiator Hose; Cooling Hose; Radiator Coolant Hose; Coolant Hose
- Position: Upper
- Base No.: 8260
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.8 x 8.2 x 17.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-8260-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
2007 Ford Ranger Return Hose
Part Number: 8L5Z-8075-A
Product Specifications
- Other Name: Hose - Supply Tank To Radiator; Engine Coolant Overflow Hose; Radiator Hose
- Replaces: 1L5Z-8075-BH, 4L5Z-8075-AA
- Base No.: 8075B
- Item Weight: 3.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L5Z-8075-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2007 Ford Ranger Overflow Hose
Part Number: 1L5Z-8N029-DB
$8.62 MSRP: $13.35
You Save: $4.73 (36%)
Product Specifications
- Other Name: Hose - Supply Tank To Radiator; Engine Coolant Reservoir Hose; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose
- Replaces: F77Z-8075-DA, F77Z-8N029-DA, F77Z-8N029-AB
- Base No.: 8N029
- Item Weight: 0.90 Pounds
- Item Dimensions: 15.7 x 13.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-8N029-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Ford Ranger Upper Hose
Part Number: 2L5Z-8260-CA
Product Specifications
- Other Name: Hose - Radiator; Radiator Coolant Hose, Upper; Multi Purpose Hose; Radiator Hose; Cooling Hose; Radiator Coolant Hose; Coolant Hose
- Position: Upper
- Base No.: 8260
- Item Weight: 0.80 Pounds
- Item Dimensions: 2.3 x 4.6 x 13.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L5Z-8260-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2007 Ford Ranger Lower Hose
Part Number: 1L5Z-8286-AD
Product Specifications
- Other Name: Hose Assembly; Radiator Coolant Hose, Lower; Multi Purpose Hose; Radiator Hose; Cooling Hose; Radiator Coolant Hose; Coolant Hose
- Position: Lower
- Base No.: 8286
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.9 x 4.1 x 20.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-8286-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2007 Ford Ranger Overflow Hose
Part Number: 1L5Z-8075-AD
Product Specifications
- Other Name: Hose - Supply Tank To Radiator; Engine Coolant Overflow Hose; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose
- Manufacturer Note: Hose from coolant reservoir to engine.
- Base No.: 8075
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-8075-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS

2007 Ford Ranger Cooling Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Ranger Cooling Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Ranger Cooling Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Ranger Cooling Hose Parts Questions & Experts Answers

Q: How to service the Cooling Hose for the coolant bypass on a 2.3L engine on 2007 Ford Ranger?
A: A technician needs to drain the cooling system before performing work on the coolant bypass hose of cars equipped with a 2.3L engine. Service the coolant bypass hose by first unclipping it from its route and then separating it from the bypass tube. A manual transmission vehicle requires users to remove the shifter before beginning work. Rear driveshaft removal should follow the procedure of disconnecting the catalytic converter-to-muffler bolts before tightening them to 40 Nm (30 ft. lbs) during reinstallation. You should start by removing the exhaust manifold-to-catalytic converter bolts and then taking out the catalytic converter while tightening these bolts to 40 Nm (30 ft. lbs) when reinstalling them. The installation requires a transmission jack to hold the transmission while the six bolts (three per side) that secure the crossmember to the frame need removal until torques reach 101 Nm (74 ft lbs). The crossmember installation requires detachment of the transmission electrical connector and removal of the transmission mount nuts while fastening the mount nuts to 99 Nm (73 ft. lbs) for reattachment. Lower the transmission to reach the coolant bypass hose. Detach the hose from the rear coolant outlet pipe before removing it. The service completion demands the reverse order of removal steps.