How to service the catalytic converter on 2007 Ford Taurus?

Service of the catalytic converter should start with positioning the vehicle on a hoist in NEUTRAL mode. Perform the following instructions by removing 2 nuts and disconnecting the muffler clamp while tightening the clamp to 40 Nm (30 ft. lbs) during installation. Method 2 requires removing the 2 catalytic converter-to-exhaust Y-pipe nuts and the catalytic converter which should be discarded together with the nuts and gasket. Make sure to clean both the catalytic converter mating surfaces together with the dual converter Y-pipe before new converter installation. The correct fitting of the catalytic converter-to-exhaust Y-pipe requires the alternation of nut torque to 40 Nm (30 ft. lbs). End the replacement by first putting on fresh nuts and a gasket followed by the muffler clamp.

OEM 2007 Ford Taurus Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Catalytic Converters found

View related parts
2007 Ford Taurus Catalytic Converter
Part Number: 5F2Z-5F250-AA
Product Specifications
- Other Name: Converter Assembly
- Manufacturer Note: HEP
- Base No.: 5F250
- Item Weight: 28.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-5F250-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Taurus Submodels:
- SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Taurus Converter & Pipe, Passenger Side
Part Number: 4F1Z-5E212-B
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter; Exhaust Pipe
- Position: Passenger Side
- Item Weight: 14.40 Pounds
- Item Dimensions: 14.8 x 10.7 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-5E212-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Taurus Catalytic Converter, Driver Side
Part Number: 4F1Z-5F250-A
Product Specifications
- Other Name: Converter Assembly; Exhaust Pipe; Converter & Pipe
- Position: Driver Side
- Replaces: 4F1Z-5F250-AA
- Base No.: 5F250
- Item Weight: 19.60 Pounds
- Item Dimensions: 14.4 x 12.6 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-5F250-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2007 Ford Taurus Catalytic Converter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Taurus Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Taurus Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Taurus Catalytic Converter Parts Questions & Experts Answers

Q: How to service the catalytic converter on 2007 Ford Taurus?
A: Service of the catalytic converter should start with positioning the vehicle on a hoist in NEUTRAL mode. Perform the following instructions by removing 2 nuts and disconnecting the muffler clamp while tightening the clamp to 40 Nm (30 ft. lbs) during installation. Method 2 requires removing the 2 catalytic converter-to-exhaust Y-pipe nuts and the catalytic converter which should be discarded together with the nuts and gasket. Make sure to clean both the catalytic converter mating surfaces together with the dual converter Y-pipe before new converter installation. The correct fitting of the catalytic converter-to-exhaust Y-pipe requires the alternation of nut torque to 40 Nm (30 ft. lbs). End the replacement by first putting on fresh nuts and a gasket followed by the muffler clamp.