How to service the catalytic converter on 2006 Ford Taurus?

Service the catalytic converter at the beginning by raising the vehicle with a hoist to neutral position. Remove the 2 nuts and muffler clamp and discard these items before installing a new clamp that should be tightened to 40 Nm. Takedown the two catalytic converter-to-dual Y-pipe nuts before removing the catalytic converter. Dispose of both the nuts and the gasket. Before installing the new catalytic converter it is crucial to clean both the surfaces where the converter meets the dual converter Y-pipe. The installation of the catalytic converter requires alternating torque application to the nuts connecting the converter to the dual converter Y-pipe at 40 Nm (30 ft. lbs.). Install new nuts together with a gasket before placing the muffler clamp in place.

OEM 2006 Ford Taurus Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Catalytic Converters found

View related parts
2006 Ford Taurus Catalytic Converter Part Number: 5F2Z-5F250-AA
Product Specifications
- Other Name: Converter Assembly
- Manufacturer Note: HEP
- Base No.: 5F250
- Item Weight: 28.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-5F250-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Converter & Pipe, Passenger Side Part Number: 4F1Z-5E212-B
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter; Exhaust Pipe
- Position: Passenger Side
- Item Weight: 14.40 Pounds
- Item Dimensions: 14.8 x 10.7 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-5E212-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Catalytic Converter, Driver Side Part Number: 4F1Z-5F250-A
Product Specifications
- Other Name: Converter Assembly; Exhaust Pipe; Converter & Pipe
- Position: Driver Side
- Replaces: 4F1Z-5F250-AA
- Base No.: 5F250
- Item Weight: 19.60 Pounds
- Item Dimensions: 14.4 x 12.6 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-5F250-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Taurus Catalytic Converter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Catalytic Converter Parts Q&A

Q: How to service the catalytic converter on 2006 Ford Taurus?
A: Service the catalytic converter at the beginning by raising the vehicle with a hoist to neutral position. Remove the 2 nuts and muffler clamp and discard these items before installing a new clamp that should be tightened to 40 Nm. Takedown the two catalytic converter-to-dual Y-pipe nuts before removing the catalytic converter. Dispose of both the nuts and the gasket. Before installing the new catalytic converter it is crucial to clean both the surfaces where the converter meets the dual converter Y-pipe. The installation of the catalytic converter requires alternating torque application to the nuts connecting the converter to the dual converter Y-pipe at 40 Nm (30 ft. lbs.). Install new nuts together with a gasket before placing the muffler clamp in place.