FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln Mark LT Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2007 Lincoln Mark LT Stabilizer Link, Front
Part Number: 5L3Z-5K483-DAProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 1.70 Pounds
- Item Dimensions: 19.8 x 6.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L3Z-5K483-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Mark LT Stabilizer Link, Front
Part Number: 5L3Z-5K483-CAProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 2.00 Pounds
- Item Dimensions: 5.9 x 2.2 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L3Z-5K483-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Mark LT Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Mark LT Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Mark LT Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln Mark LT Sway Bar Link Parts Questions & Experts Answers
- Q: How to Service and Repair the Sway Bar Link on 2007 Lincoln Mark LT?A: A sway bar link servicing and repair procedure needs the vehicle set to NEUTRAL position on a hoist before starting the work. You should first eliminate the upper sway bar link nuts before discarding the lower nuts as you remove the entire sway bar links. Remove each sway bar bracket nut and then take out its bracket followed by the sway bar. Install the sway bar maintaining symmetrical center position between the two brackets along with equal distances between brackets and links on both sides while confirming the paint dot faces left on the vehicle. The first step is to loosely install all sway bar components using bracket nuts and stabilize them while torquing bar links and lower nuts to 90 Nm (66 ft. lbs.). Make sure to position the sway bar at a ninety-degree angle to the link assembly before the sway bar link nut will properly seat itself. Apply the sway bar into its proper position before torquing the upper bracket nuts to 25 Nm (18 ft. lbs.). Position the sway bar in its center before applying torsion to the bracket nuts to 55 Nm (41 ft. lbs.).
Related 2007 Lincoln Mark LT Parts
2007 Lincoln Mark LT Alignment Bolt
2007 Lincoln Mark LT Axle Vent
2007 Lincoln Mark LT Coil Springs
2007 Lincoln Mark LT Control Arm
2007 Lincoln Mark LT Shock Absorber
2007 Lincoln Mark LT Shock And Strut Mount
2007 Lincoln Mark LT Shock and Strut Boot
2007 Lincoln Mark LT Spindle
2007 Lincoln Mark LT Steering Knuckle
2007 Lincoln Mark LT Sway Bar Bracket
2007 Lincoln Mark LT Sway Bar Bushing
2007 Lincoln Mark LT Sway Bar Kit