FordParts
My Garage
My Account
Cart
OEM 2007 Lincoln Navigator Fuel Injector
Gas Injector- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fuel Injector found
2007 Lincoln Navigator Injector Part Number: 7L1Z-9F593-B
Product Specifications- Other Name: Injector Assembly; Gasoline Injector; Fuel Injector
- Base No.: 9F593
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.8 x 2.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 7L1Z-9F593-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Lincoln Navigator Fuel Injector
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Navigator Fuel Injector available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Navigator Fuel Injector as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Lincoln Navigator Fuel Injector Parts Q&A
- Q: How should one safely service the fuel injector and fuel rail on 2007 Lincoln Navigator?A: Service technicians should prevent fires by keeping fuel-related components clear of all smoking materials since fuel solutions are highly volatile. Users should spare themselves from injury by draining fuel system pressure before working with any fuel tubes or components. The cleaning process should include proper handling of fuel injection equipment along with the use of stoppers to seal open fuel lines. The service starts with disconnecting the battery ground cable after which workers remove the fuel supply tube spring lock coupling. To extract the crankcase vent tube start by detaching both air cleaner outlet pipe and quick connect couplings. The generator wiring harness retainer must be detached from the air cleaner outlet pipe-to-throttle body adapter before removing its four bolts by applying clean engine coolant on the seal and torquing them to 10 Nm (89 lb-in). Start by removing positive crankcase ventilation tube through quick connect coupling disconnect while proceeding to disconnect electronic throttle control before taking off throttle position sensor and heated PCV intake fitting as well as the eight fuel injector electrical connectors. The first step is to remove four fuel rail bolts by tightening them to 10 Nm (89 lb-in) before removing the fuel rail and fuel injectors as an assembly. Apply special fuel-resistant O-ring seals which replace the usual ones to avoid leaks between the fuel injector-to-fuel rail locking clips. Prior to disconnecting fuel injectors from the fuel rail it is essential to discard old O-ring seals and apply clean engine oil for lubricating new O-ring seals. Finish the installation by performing the reverse of removal steps while applying oil to the new O-ring seals before installation.