How to service and repair the ignition coil-on-plug on 2007 Lincoln Navigator?

In order to service the ignition coil-on-plug, remove the battery and ignition coil connector. Unscrew the securing bolt and take out the coil twisting. Install the new coil, and tighten to 6 Nm (53 lb-in), being careful that the spring is correctly attached. Revert the steps made to remove, apply dielectric compound on the inside of the boots.

OEM 2007 Lincoln Navigator Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2007 Lincoln Navigator Ignition Coil, Black Part Number: 3L3Z-12029-BA
$49.28 MSRP: $81.09
You Save: $31.81 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Manufacturer Note: With Black Coil Boots
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 8.0 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-12029-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L GAS

2007 Lincoln Navigator Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Navigator Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Navigator Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Navigator Ignition Coil Parts Q&A

Q: How to service and repair the ignition coil-on-plug on 2007 Lincoln Navigator?
A: In order to service the ignition coil-on-plug, remove the battery and ignition coil connector. Unscrew the securing bolt and take out the coil twisting. Install the new coil, and tighten to 6 Nm (53 lb-in), being careful that the spring is correctly attached. Revert the steps made to remove, apply dielectric compound on the inside of the boots.