How to remove and replace the front shock absorber and spring assembly on 2007 Mercury Grand Marquis?

Maintenance of the front shock absorber and spring assembly begins with turning off air suspension system power to avoid unexpected air spring movements because unexpected changes can cause the vehicle to shift during servicing. A vehicle with fire suppression must follow the procedure to disable this system. The front vehicle needs to be placed in the NEUTRAL position on a hoist. Users must not touch the center nut because this maintains the upper spring mount and discarding tension can result in spring loss. The three shock absorber mounting bracket nuts should be removed but new ones require a torque of 30 Nm (22 lb-ft) after installation. Protect the caliper and anchor plate assembly from hanging off the brake hose by removing its two bolts and securing it using mechanic's wire with a torque of 160 Nm (118 lb-ft) while reinstalling. A hex tool prohibits spin during upper stabilizer bar link nut removal so you can discard it before the installation where the new nut needs 63 Nm (46 lb-ft) torque tightness. To replace this part you must discard the lower stabilizer bar link nut along with the link before applying new hardware then torquing it to 55 Nm (41 lb-ft). Climb the wheel speed sensor wiring harness retainer from the wheel knuckle before you remove and throw away the upper ball joint nut which needs to be torqued to 150 Nm (111 lb-ft). You should remove the shock absorber and spring assembly lower nut and flag bolt and discard the old nut before torquing the new one to 235 Nm (173 lb-ft). The procedure concludes by removing both shock absorber and spring assembly while also applying new power to the fire suppression system when present. Before tightening any retainers that clamp bushings you must apply vehicle weight to the wheels during installation according to standard procedures.

OEM 2007 Mercury Grand Marquis Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Shock Absorbers found

View related parts
2007 Mercury Grand Marquis Shock Absorber
Part Number: BW7Z-18124-A
$102.65 MSRP: $168.91
You Save: $66.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Air Spring to Coil Spring Conversion; Complete Strut.; Strut; Shock
- Replaces: 7W7Z-18124-H, ASH-1035, 6W7Z-18124-B, 6W7Z-18124-D, ASH-24529, 7W7Z-18124-A, BW7Z-18124-B, 6W7Z-18124-A, 7W7Z-18124-C, 7W7Z-18124-D, ASH-1037, ASH-1036, ASH-12274
- Base No.: 18124
- Item Weight: 7.00 Pounds
- Item Dimensions: 4.9 x 5.0 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: BW7Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Grand Marquis Submodels:
- GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Mercury Grand Marquis Shock Absorber, Gray/Red, Rear
Part Number: 8W7Z-18125-D
$77.11 MSRP: $129.45
You Save: $52.34 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Position: Rear
- Replaces: 4W3Z-18125-AA, 6W7Z-18125-D, 6W1Z-18125-A, 7W7Z-18125-D, 8W3Z-18125-A, 8W7Z-18125-B, ASH-1152, ASH-24537, ASH-711, 7W1Z-18125-A, ASH-12275, 3W7Z-18125-GA, 4W7Z-18125-DA, 3U2Z-18125-AC, 7W3Z-18125-H, 8W7Z-18125-C, ASH-24538, ASH-1038, ASH-24536, ASH-267, ASH-1041
- Base No.: 18125
- Item Weight: 5.10 Pounds
- Item Dimensions: 27.0 x 3.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W7Z-18125-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Grand Marquis Submodels:
- GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Mercury Grand Marquis Shock Absorber, Blue/Green, Rear
Part Number: BW7Z-18125-B
$85.31 MSRP: $140.36
You Save: $55.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Rear Suspension Shock; Strut & Shock Kit; Air to Coil Conversion; Complete Strut; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 3U2Z-18125-AF, 3W7Z-18125-FA, 4W7Z-18125-CA, 6W7Z-18125-C, 6W7Z-18125-B, 7W7Z-18125-B, 7W7Z-18125-C, 8W1Z-18125-D, 8W1Z-18125-B, 8W1Z-18125-C, ASH-1040, ASH-1039, ASH-24535, ASH-1151, ASH-24490, 7W1Z-18125-G, ASH-710, 3U2Z-18125-AB, ASH-12276, BW7Z-18125-A, 8W1Z-18125-A, ASH-24534, ASH-24491
- Base No.: 18125
- Item Weight: 10.60 Pounds
- Item Dimensions: 29.4 x 6.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: BW7Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Grand Marquis Submodels:
- GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Mercury Grand Marquis Shock Absorber
Part Number: 9W1Z-18124-A
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Air Spring to Coil Spring Conversion; Complete Strut.; Strut; Shock
- Replaces: 6W1Z-18124-A, ASH-1034, 7W1Z-18124-A
- Base No.: 18124
- Item Weight: 6.50 Pounds
- Item Dimensions: 22.3 x 5.0 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9W1Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Grand Marquis Submodels:
- GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Mercury Grand Marquis Shock Absorber, Front
Part Number: 3U2Z-18124-BJ
Product Specifications
- Other Name: Shock Absorber Assembly; Strut; Shock Absorber Assembly - Front
- Manufacturer Note: RH & LH, "White" (replacing 3W7Z,18124,AA) , base, standard duty suspension, BEFORE 12/01/03
- Position: Front
- Base No.: 18124
- Item Weight: 7.00 Pounds
- Item Dimensions: 4.7 x 4.6 x 21.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3U2Z-18124-BJ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Grand Marquis Submodels:
- GS, GSL, Limited Edition, LS, LSE, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Mercury Grand Marquis Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Grand Marquis Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Grand Marquis Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Mercury Grand Marquis Shock Absorber Parts Questions & Experts Answers

Q: How to remove and replace the front shock absorber and spring assembly on 2007 Mercury Grand Marquis?
A: Maintenance of the front shock absorber and spring assembly begins with turning off air suspension system power to avoid unexpected air spring movements because unexpected changes can cause the vehicle to shift during servicing. A vehicle with fire suppression must follow the procedure to disable this system. The front vehicle needs to be placed in the NEUTRAL position on a hoist. Users must not touch the center nut because this maintains the upper spring mount and discarding tension can result in spring loss. The three shock absorber mounting bracket nuts should be removed but new ones require a torque of 30 Nm (22 lb-ft) after installation. Protect the caliper and anchor plate assembly from hanging off the brake hose by removing its two bolts and securing it using mechanic's wire with a torque of 160 Nm (118 lb-ft) while reinstalling. A hex tool prohibits spin during upper stabilizer bar link nut removal so you can discard it before the installation where the new nut needs 63 Nm (46 lb-ft) torque tightness. To replace this part you must discard the lower stabilizer bar link nut along with the link before applying new hardware then torquing it to 55 Nm (41 lb-ft). Climb the wheel speed sensor wiring harness retainer from the wheel knuckle before you remove and throw away the upper ball joint nut which needs to be torqued to 150 Nm (111 lb-ft). You should remove the shock absorber and spring assembly lower nut and flag bolt and discard the old nut before torquing the new one to 235 Nm (173 lb-ft). The procedure concludes by removing both shock absorber and spring assembly while also applying new power to the fire suppression system when present. Before tightening any retainers that clamp bushings you must apply vehicle weight to the wheels during installation according to standard procedures.