FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Montego EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 EGR Valve found
2007 Mercury Montego EGR Valve Part Number: 5F9Z-9D475-BA
$100.44 MSRP: $165.27You Save: $64.83 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: 5F9Z-9D475-AA
- Base No.: 9D475
- Item Weight: 1.60 Pounds
- Item Dimensions: 5.5 x 4.4 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-9D475-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Montego EGR Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Montego EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Montego EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Montego EGR Valve Parts Q&A
- Q: How to Service the EGR Valve System Module on 2007 Mercury Montego?A: The service procedure for Exhaust Gas Recirculation (EGR) system module starts with removing four transaxle roll restrictor brace bolts followed by wire brush cleaning the bolts before applying new threadlock and tightening them to 55 Nm (41 lb-ft). Once you remove the bolt and the transaxle roll restrictor brace you need to clean both parts before applying fresh thread-lock for bolt tightening to 48 Nm (35 lb-ft). Begin service of the EGR system module by separating first the vacuum tube and electrical connector and then the EGR system module-to-EGR system module tube fitting which needs tightening to 40 Nm (30 lb ft) torque. The installation of the EGR system module requires a fresh gasket that has its raised ring position facing the intake manifold before the two securing bolts achieve a torque of 25 Nm (18 lb-ft). To finalize the installation reverse the steps used for removal.