FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Montego Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Catalytic Converters found
2007 Mercury Montego Catalytic Converter, Front Driver Side Part Number: 7G1Z-5E213-A
$758.58 MSRP: $1049.43You Save: $290.85 (28%)Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Front Forward; Preconverter
- Position: Front Driver Side
- Base No.: 5F250
- Item Weight: 9.20 Pounds
- Item Dimensions: 14.3 x 12.2 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7G1Z-5E213-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Front Rearward; Preconverter
- Position: Front Passenger Side
- Base No.: 5E212A
- Item Weight: 9.20 Pounds
- Item Dimensions: 14.4 x 12.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7G1Z-5E212-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Front Forward; Preconverter
- Position: Front Driver Side
- Base No.: 5F250
- Item Weight: 10.50 Pounds
- Item Dimensions: 14.7 x 12.2 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F9Z-5E213-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Rear
- Position: Rear
- Base No.: 5E212B
- Item Weight: 7.20 Pounds
- Item Dimensions: 14.6 x 12.1 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F9Z-5E212-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Front Rearward; Preconverter
- Position: Front Passenger Side
- Base No.: 5E212A
- Item Weight: 10.20 Pounds
- Item Dimensions: 14.3 x 12.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F9Z-5E212-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Montego Catalytic Converter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Montego Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Montego Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Montego Catalytic Converter Parts Q&A
- Q: What steps should be followed when servicing the catalytic converter on 2007 Mercury Montego?A: Service the catalytic converter during a cooldown period since its operating temperature near the catalytic converter reaches extremely high values. Replace the two upper catalytic converter-to-exhaust manifold bolts and gaskets that either service the front or rear unit by installing new gaskets which require 70 Nm (52 lb-ft) torque. Set the vehicle on a hoist at neutral gear position. The installation of front catalytic converter brackets requires unforgiving the bracket bolt followed by tightening to 40 Nm (30 lb-ft). Unplug the electrical connection of the catalyst monitor sensor. Remove and throw away both lower catalytic converter nuts before pulling out the front or rear catalytic converter. The catalytic converter installation process should include new gaskets along with alternative micronutrient applications to the catalyst converter nuts while maintaining exhaust system sealing and keeping exhaust flanges parallel until torque reaches 40 Nm (30 lb-ft). The front catalytic converter replacement requires checking the bracket clamp for replacement and installing proper torque at 40 Nm (30 lb-ft) on the clamp bolt. Prior to catalyst converter installation you need to apply anti-seize lubricant to the sensor threads before unscrewing the sensor and then tighten it to 47 Nm (35 lb-ft). Reverse the exhaust system removal procedure while using new gaskets and fasteners to clean the mating surfaces of the connections.