FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Monterey Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Exhaust Manifolds found
2007 Mercury Monterey Exhaust Manifold, Driver Side Part Number: 4F2Z-9431-BA
$244.04 MSRP: $337.60You Save: $93.56 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 9.40 Pounds
- Item Dimensions: 14.7 x 11.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-9431-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Replaces: 5F2Z-9430-A
- Base No.: 9430A
- Item Weight: 9.80 Pounds
- Item Dimensions: 14.8 x 9.7 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-9430-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Monterey Exhaust Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Monterey Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Monterey Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Monterey Exhaust Manifold Parts Q&A
- Q: How to service the left-hand exhaust manifold on 2007 Mercury Monterey?A: Begin service of the left-hand exhaust manifold by raising a vehicle to a hoist using neutral gear. Start by taking off first the dual converter Y-pipe then remove the oil level indicator tube bolt. To start the process disconnect the EGR tube through the removal of its nut before breaking its connection to the exhaust manifold. After removing the six exhaust manifold nuts it is possible to detach the left-hand exhaust manifold which requires discarding the existing gasket. Place the new left-hand exhaust manifold gasket then mount the manifold while installing the six nuts with torque to 25 Nm (18 ft. lbs.) according to sequence. You should attach the EGR tube to the exhaust manifold after tightening it to 40 Nm (30 ft. lbs.) then bolt the oil level indicator tube before tightening it to 10 Nm (89 inch lbs.). Minor procedures must include reinstallation of the dual converter Y-pipe.