FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Mountaineer Fuel Filler Hose
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fuel Filler Hose found
2007 Mercury Mountaineer Filler Hose Part Number: 4L2Z-9047-AA
Product Specifications- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Filler Neck Hose; Fuel Hose; Hose
- Replaces: 1L2Z-9047-AA
- Base No.: 9047
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-9047-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Mountaineer Fuel Filler Hose
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mountaineer Fuel Filler Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mountaineer Fuel Filler Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Mountaineer Fuel Filler Hose Parts Q&A
- Q: How to service and repair the fuel filler hose on 2007 Mercury Mountaineer?A: A suitable starting point for servicing or repairing the fuel filler hose requires a neutral-parked vehicle on a hoist. Disconnect the negative terminal of the battery while opening the fuel tank cap. Use a torque wrench to attach and tighten the fuel tank filler cap three bolts with 1 Nm (9 lb-in) force before cap reinstallation. To work on the fuel filler hose of Explorer and Mountaineer models users must depress the two tabs that secure the fresh air vent tube in the fuel door pocket to inner fenderwell. To begin the procedure disconnect the fuel filler pipe vapor tube first from the fuel pressure sensor and the vapor tube assembly quick connect coupling and then proceed to disconnect both the rear axle vent hose and the dust separator hose. Loosen and disconnect the fuel tank filler pipe hose with a clamp that will need tightening to 3 Nm (27 lb-in) when reassembling. The two bolts that attach the fuel tank filler pipe assembly must be removed although installation demands bolt torque be set to 15 Nm (11 lb-ft). The complete installation process requires you to reverse all steps of removal. Working on fuel-related components requires following all fire safety precautions and making sure that all fuel liquid and vapor openings remain sealed during work through caps or tapes.