FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Mountaineer Fuel Filler Hose
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fuel Filler Hoses found
2008 Mercury Mountaineer Filler Tube Part Number: 8U5Z-17B068-B
$6.11 MSRP: $8.67You Save: $2.56 (30%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Funnel; Fuel Filler Neck Adapter; Fuel Filler Neck Sleeve; Filler Neck Sleeve; Fuel Filler Hose; Fuel Tank Filler; Filler Pipe Tube; Tube; Filler
- Manufacturer Note: Attached To Underneath 42624 In Luggage Compartment
- Base No.: 17B068
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8U5Z-17B068-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mountaineer Filler Hose Part Number: 4L2Z-9047-AA
Product Specifications- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Filler Neck Hose; Fuel Hose; Hose
- Replaces: 1L2Z-9047-AA
- Base No.: 9047
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-9047-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Mountaineer Fuel Filler Hose
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mountaineer Fuel Filler Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mountaineer Fuel Filler Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Mountaineer Fuel Filler Hose Parts Q&A
- Q: What are the safety precautions and steps involved in servicing the fuel filler hose on 2008 Mercury Mountaineer?A: The fuel filler hose service must include proper safety protocols because highly flammable mixtures exist near all fuel components. Vehicle fuel maintenance requires you to both restrain from smoking and ignore fire along with careful handling of fuels to defend against fires that might occur due to hot car components. Empty the fuel tank as the first step. The fuel tank filler pipe hose requires no removal of the piping to service it because technicians can loosen the fuel tank clamp to disconnect the hose. When installing the hose maintain a tightness of 3 Nm which equals 27 lb-in. Open the fuel tank filler cap if necessary then remove the three bolts before tightening them to 1 Nm (9 lb-in) at reinstallation. To service the fuel filler doors of Explorer and Mountaineer vehicles owners should push down the two tabs located on the pockets of the fuel vent. Owners of late Explorer/Mountaineer vehicles need to take off the fuel tank filler pipe upper retainer. Detach the fuel vapor tube of the filler pipe from the sensor and the rear axle vent hose as well as the dust separator hose. The last step involves removing the assembly fuel tank filler pipe bolt with a torque setting at 15 Nm (11 lb-ft) and following the reverse remove sequence to complete the service process.