How to Properly Maintain the Trailing Arm on 2007 Mercury Mountaineer?

To service the trailing arm, remove the toe link and parking brake cable bracket bolt (tighten to 10 Nm upon reinstallation). Discard the trailing arm bolt and replace it, tightening to 300 Nm. Remove the three wheel knuckle bolts, reinstalling with new parts and tightening to 275 Nm. Maintain original fastener orientation.

OEM 2007 Mercury Mountaineer Trailing Arm

Trailing Control Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Trailing Arm found

View related parts
2007 Mercury Mountaineer Lower Control Arm, Rear Part Number: 6L2Z-5A649-AE
$83.06 MSRP: $113.02
You Save: $29.96 (27%)
ADD TO CART
Product Specifications
- Other Name: Arm Assembly - Rear Suspension; Suspension Control Arm, Rear Lower Rearward; Suspension Control Arm; Control Arm
- Position: Rear Lower
- Base No.: 5A649
- Item Weight: 9.20 Pounds
- Item Dimensions: 6.8 x 6.8 x 29.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6L2Z-5A649-AE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2007 Mercury Mountaineer Trailing Arm

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mountaineer Trailing Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mountaineer Trailing Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Mercury Mountaineer Trailing Arm Parts Q&A

Q: How to Properly Maintain the Trailing Arm on 2007 Mercury Mountaineer?
A: To service the trailing arm, remove the toe link and parking brake cable bracket bolt (tighten to 10 Nm upon reinstallation). Discard the trailing arm bolt and replace it, tightening to 300 Nm. Remove the three wheel knuckle bolts, reinstalling with new parts and tightening to 275 Nm. Maintain original fastener orientation.