FordParts
My Garage
My Account
Cart
OEM 2008 Ford E-150 Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2008 Ford E-150 Stabilizer Link, Front Part Number: 8C2Z-5K483-A
$46.14 MSRP: $73.27You Save: $27.13 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 7.7 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8C2Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford E-150 Stabilizer Link, Rear Part Number: EOTZ-5K484-A
$34.81 MSRP: $55.27You Save: $20.46 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
- Manufacturer Note: Rear, 4x2 - 137", 161" W.B
- Position: Rear
- Base No.: 5K484
- Item Weight: 1.20 Pounds
- Item Dimensions: 1.6 x 1.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: EOTZ-5K484-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford E-150 Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-150 Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-150 Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford E-150 Sway Bar Link Parts Q&A
- Q: How to Service the Front Sway Bar Link on 2008 Ford E-150?A: Service of the front sway bar link starts with placing the vehicle in neutral gear on a hoist. A hex holder will stop the stud from rotating when removing the upper sway bar link nut that needs disposal. Apply 80 Nm torque (59 lb-ft) during the installation process of the brand-new nut. You should once more apply the hex holding feature to take off and dispose of the lower sway bar link nut before taking out the sway bar link. Customers should tighten the lower nut to 80 Nm (59 lb-ft). The installation process ends with the opposite sequence to restore the vehicle to its original state. The suspension system's integrity depends on using new replacement parts with identical numbers or equivalent along with following the provided torque values.