How to service the brake caliper on 2008 Ford Edge?

The first step for brake caliper servicing includes eliminating the wheel as well as tire from the vehicle. Begin by removing the caliper flow bolt and placing the hose with both copper washers to discard. The flow bolt installation requires a torque of 25 Nm (18 lb-ft) while using fresh copper washers for the process. The guide pin bolts feature different lengths where the longer piece belongs to the upper bolt; remove both guide pin bolts then install them by tightening to 88 Nm (65 lb-ft). The brake caliper installation should proceed as the reverse of removal while carefully handling the hose to prevent any hose twist followed by system bleeding. Apply only fresh brake fluid which adheres to manufacturer requirements and do not reuse drained fluid because it may contaminate components and produce damage. Brake fluid poses a risk to painted and plastic surfaces so it needs immediate water wash when spilled. You can get emergency medical information about Ford/Motorcraft products by calling 1-800-959-3673 while the Material Safety Data Sheet (MSDS) provides additional product information in case it is available.

OEM 2008 Ford Edge Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2008 Ford Edge Caliper, Front Passenger Side Part Number: BT4Z-2B120-A
$84.66 MSRP: $140.36
You Save: $55.70 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Passenger Side
- Replaces: 7T4Z-2B120-E, BRCF-146
- Base No.: 2B120
- Item Weight: 10.40 Pounds
- Item Dimensions: 8.9 x 8.2 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BT4Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2008 Ford Edge Caliper, Front Driver Side Part Number: BT4Z-2B121-A
$95.86 MSRP: $156.00
You Save: $60.14 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Front Driver Side
- Replaces: 7T4Z-2B121-E, BRCF-147
- Base No.: 2B120
- Item Weight: 12.10 Pounds
- Item Dimensions: 9.0 x 8.1 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BT4Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2008 Ford Edge Caliper, Rear Driver Side Part Number: 7T4Z-2553-B
$130.28 MSRP: $180.24
You Save: $49.96 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Rear Driver Side
- Base No.: 2552
- Item Weight: 8.90 Pounds
- Item Dimensions: 7.8 x 6.1 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-2553-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge Caliper, Rear Passenger Side Part Number: 7T4Z-2552-B
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Position: Rear Passenger Side
- Base No.: 2552
- Item Weight: 8.10 Pounds
- Item Dimensions: 5.9 x 7.6 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-2552-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS

2008 Ford Edge Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Edge Brake Caliper Parts Q&A

Q: How to service the brake caliper on 2008 Ford Edge?
A: The first step for brake caliper servicing includes eliminating the wheel as well as tire from the vehicle. Begin by removing the caliper flow bolt and placing the hose with both copper washers to discard. The flow bolt installation requires a torque of 25 Nm (18 lb-ft) while using fresh copper washers for the process. The guide pin bolts feature different lengths where the longer piece belongs to the upper bolt; remove both guide pin bolts then install them by tightening to 88 Nm (65 lb-ft). The brake caliper installation should proceed as the reverse of removal while carefully handling the hose to prevent any hose twist followed by system bleeding. Apply only fresh brake fluid which adheres to manufacturer requirements and do not reuse drained fluid because it may contaminate components and produce damage. Brake fluid poses a risk to painted and plastic surfaces so it needs immediate water wash when spilled. You can get emergency medical information about Ford/Motorcraft products by calling 1-800-959-3673 while the Material Safety Data Sheet (MSDS) provides additional product information in case it is available.