How to Remove and Replace the Front Shock Absorber on 2008 Ford Edge?

The procedure for removing and replacing the suspension strut starts with removing and then replacing the 4 shock absorber upper mount nuts tightened at 30 Nm (22 lb-ft). Start by unscrewing the wheel together with the tire before eliminating the brake flexible hose bracket bolt in order to free the shock absorber hose. Reinstall the bolt at 20 Nm (15 lb-ft). First detach the wheel speed sensor harness from the shock absorber bracket before unscrewing the shock absorber lower nuts and flag bolts to remove the shock absorber together with its spring assembly and discard both components. Reinstallation requires tightening the lower nuts and flag bolts to a torque of 225 Nm (166 lb-ft). The installation should proceed in the reverse order. The inspection of the front end should happen as the final step. Install new parts which use same numbers or equivalent quality alongside following specified torque standards for correct suspension retention of critical elements.

OEM 2008 Ford Edge Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Shock Absorbers found

View related parts
2008 Ford Edge Shock Absorber, Rear Part Number: 8T4Z-18125-A
$69.53 MSRP: $116.73
You Save: $47.20 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 7T4Z-18125-AB, 8A1Z-18125-D, ASH-1158
- Base No.: 18125
- Item Weight: 5.10 Pounds
- Item Dimensions: 21.1 x 3.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8T4Z-18125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge Strut, Front Passenger Side Part Number: 7T4Z-18124-AB
$118.80 MSRP: $200.00
You Save: $81.20 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Front Right Suspension Strut Assembly; Complete Strut Kit.; Shock Absorber
- Position: Front Passenger Side
- Replaced by: 7A1Z-18124-AB
- Replaces: 7T4Z-18124-A
- Base No.: 18124
- Item Weight: 11.10 Pounds
- Item Dimensions: 31.6 x 7.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-18124-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge Shock Absorber Part Number: 8T4Z-18125-B
$69.53 MSRP: $116.73
You Save: $47.20 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Strut and Shock Assembly; Complete Strut Set.; Shock
- Replaced by: 8T4Z-18125-A
- Base No.: 18125
- Item Weight: 5.50 Pounds
- Item Dimensions: 21.1 x 3.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8T4Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, Sport | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge Strut, Front Driver Side Part Number: 7T4Z-18124-BB
$104.74 MSRP: $142.53
You Save: $37.79 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Front Left Suspension Strut Assembly; Complete Strut Kit.; Shock Absorber
- Position: Front Driver Side
- Replaces: 7T4Z-18124-B
- Base No.: 18124
- Item Weight: 11.90 Pounds
- Item Dimensions: 32.2 x 7.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-18124-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge Strut, Front Driver Side Part Number: 9A1Z-18124-CA
$113.72 MSRP: $190.91
You Save: $77.19 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Complete Suspension Strut and Shock Kit.; Shock Absorber
- Position: Front Driver Side
- Replaces: 8T4Z-18124-DB, AST-898, AST-872, 9T4Z-18124-E
- Base No.: 18124
- Item Weight: 17.70 Pounds
- Item Dimensions: 7.7 x 7.7 x 32.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9A1Z-18124-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, Sport | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Edge Strut, Passenger Side Part Number: 8T4Z-18124-CB
Product Specifications
- Other Name: Kit - Shock Absorber
- Position: Passenger Side
- Base No.: 18124
- Item Weight: 14.80 Pounds
- Item Dimensions: 31.2 x 7.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8T4Z-18124-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Edge Submodels:
- Limited, SE, SEL, Sport | 6 Cyl 3.5 L GAS

2008 Ford Edge Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Edge Shock Absorber Parts Q&A

Q: How to Remove and Replace the Front Shock Absorber on 2008 Ford Edge?
A: The procedure for removing and replacing the suspension strut starts with removing and then replacing the 4 shock absorber upper mount nuts tightened at 30 Nm (22 lb-ft). Start by unscrewing the wheel together with the tire before eliminating the brake flexible hose bracket bolt in order to free the shock absorber hose. Reinstall the bolt at 20 Nm (15 lb-ft). First detach the wheel speed sensor harness from the shock absorber bracket before unscrewing the shock absorber lower nuts and flag bolts to remove the shock absorber together with its spring assembly and discard both components. Reinstallation requires tightening the lower nuts and flag bolts to a torque of 225 Nm (166 lb-ft). The installation should proceed in the reverse order. The inspection of the front end should happen as the final step. Install new parts which use same numbers or equivalent quality alongside following specified torque standards for correct suspension retention of critical elements.