FordParts
My Garage
My Account
Cart
OEM 2008 Ford Escape A/C Expansion Valve
Air Conditioning Expansion Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Expansion Valves found
2008 Ford Escape Expansion Valve Part Number: AL8Z-19849-A
$38.07 MSRP: $60.45You Save: $22.38 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve
- Replaces: 8L8Z-19849-A
- Base No.: 19849
- Item Weight: 9.00 Pounds
- Item Dimensions: 4.0 x 2.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL8Z-19849-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Expansion Valve Part Number: 9M6Z-19849-A
Product Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve
- Replaces: 8M6Z-19849-A, YG-407
- Base No.: 19849
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9M6Z-19849-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape A/C Expansion Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Escape A/C Expansion Valve Parts Q&A
- Q: How to Service the A/C Expansion Valve on 2008 Ford Escape?A: Begin recovery of refrigerant before working on the thermostatic expansion valve (TXV). Disconnect the TXV fitting by rotating its nut and then take off the parts including all gasket seals. Eliminate the two TXV bolts first along with the TXV from the system while getting rid of its O-ring seals. Following uninstall steps, tighten the TXV stud to 6 Nm (53 lb-in) before adding the TXV fitting nut. Put new gasket and O-ring parts in place and finish the process by taking the air out of the system and checking for leaks before adding refrigerant. A new receiver/drier must replace the old unit when physical signs show a broken A/C compressor or receiver/drier damage.