How to service and repair the brake backing plate on 2008 Ford Escape?

To service and repair the brake backing plate, remove the rear wheel cylinder and brake flexible hose bracket bolt. Compress the parking brake cable conduit locking tabs and pull the parking brake cable assembly through the backing plate. Remove the rear wheel hub, backing plate bolts, and the backing plate, then reverse the procedure for reinstallation.

OEM 2008 Ford Escape Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Backing Plates found

View related parts
2008 Ford Escape Backing Plate, Rear Driver Side Part Number: 8L8Z-2212-B
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Left; Brake Dust Shield
- Position: Rear Driver Side
- Base No.: 2211
- Item Weight: 5.20 Pounds
- Item Dimensions: 15.5 x 14.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-2212-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Backing Plate, Rear Passenger Side Part Number: 8L8Z-2211-B
Product Specifications
- Other Name: Plate Assembly - Brake Back; Brake Backing Plate, Rear Right; Brake Dust Shield
- Position: Rear Passenger Side
- Base No.: 2211
- Item Weight: 5.70 Pounds
- Item Dimensions: 15.9 x 14.1 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-2211-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Splash Shield, Front Part Number: YL8Z-2K004-AA
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front; Dust Shield; Brake Dust Shield
- Manufacturer Note: RH/LH
- Position: Front
- Base No.: 2K004
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.3 x 13.1 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YL8Z-2K004-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Ford Escape Brake Backing Plate

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Brake Backing Plate available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Brake Backing Plate as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Escape Brake Backing Plate Parts Q&A

Q: How to service and repair the brake backing plate on 2008 Ford Escape?
A: To service and repair the brake backing plate, remove the rear wheel cylinder and brake flexible hose bracket bolt. Compress the parking brake cable conduit locking tabs and pull the parking brake cable assembly through the backing plate. Remove the rear wheel hub, backing plate bolts, and the backing plate, then reverse the procedure for reinstallation.