How to service and repair the rear brake line on 2008 Ford Escape?

The repair process of the rear brake flexible hose starts when you remove the wheel together with the tire. The following step requires removal of the brake caliper flow bolt while discarding both copper washers before you install the new bolt with 35 Nm (26 lb-ft) torque setting. The service process for brake flexible hoses starts with removing the retaining clip and then disconnecting the tube fitting from the hose while keeping torque at 15 Nm (11 lb-ft). Proceed by using a wrench to remove the bracket bolt along with the brake flexible hose and finalize hose tightening to 17 Nm (13 lb-ft) during the installation process. To finish the repair process first reverse the uninstallation steps while performing a brake caliper bleed operation. The system needs new clean brake fluid which must be in accordance with manufacturer requirements so any leftover fluids need removal to stop contamination damage. Brake fluid that spills off should be washed away from painted or plastic components immediately with water because it can create damage. Restoration of life-threatening information about brake fluid is available through 1-800-959-3673 for USA and Canada while Material Safety Data Sheet (MSDS) provides crucial details if possessed.

OEM 2008 Ford Escape Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2008 Ford Escape Flex Hose, Front
Part Number: BL8Z-2078-A
$43.40 MSRP: $68.91
You Save: $25.51 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Front Flex Hose; Hydraulic Hose
- Position: Front
- Replaces: 9L8Z-2078-A, 8L8Z-2078-A, 8L8Z-2078-B
- Base No.: 2078
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.1 x 19.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: BL8Z-2078-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Flex Hose, Driver Side
Part Number: 9L8Z-2A442-B
$27.37 MSRP: $43.45
You Save: $16.08 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Driver Side
- Replaces: 8L8Z-2282-B, 8L8Z-2A442-A
- Base No.: 2282
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.1 x 3.2 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2A442-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Flex Hose, Passenger Side
Part Number: 9L8Z-2A442-A
$25.53 MSRP: $40.55
You Save: $15.02 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Passenger Side
- Replaces: 8L8Z-2282-A
- Base No.: 2282
- Item Weight: 1.40 Pounds
- Item Dimensions: 3.1 x 2.1 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2A442-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Flex Hose, Rear Driver Side
Part Number: 8M6Z-2282-B
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Base No.: 2282
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.3 x 5.8 x 15.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8M6Z-2282-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2008 Ford Escape Flex Hose, Rear Passenger Side
Part Number: 8M6Z-2282-A
Product Specifications
- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Brake Hydraulic Hose; Hydraulic Hose
- Position: Rear Passenger Side
- Base No.: 2282
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.3 x 5.9 x 15.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8M6Z-2282-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2008 Ford Escape Brake Line

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Escape Brake Line Parts Questions & Experts Answers

Q: How to service and repair the rear brake line on 2008 Ford Escape?
A: The repair process of the rear brake flexible hose starts when you remove the wheel together with the tire. The following step requires removal of the brake caliper flow bolt while discarding both copper washers before you install the new bolt with 35 Nm (26 lb-ft) torque setting. The service process for brake flexible hoses starts with removing the retaining clip and then disconnecting the tube fitting from the hose while keeping torque at 15 Nm (11 lb-ft). Proceed by using a wrench to remove the bracket bolt along with the brake flexible hose and finalize hose tightening to 17 Nm (13 lb-ft) during the installation process. To finish the repair process first reverse the uninstallation steps while performing a brake caliper bleed operation. The system needs new clean brake fluid which must be in accordance with manufacturer requirements so any leftover fluids need removal to stop contamination damage. Brake fluid that spills off should be washed away from painted or plastic components immediately with water because it can create damage. Restoration of life-threatening information about brake fluid is available through 1-800-959-3673 for USA and Canada while Material Safety Data Sheet (MSDS) provides crucial details if possessed.