FordParts
My Garage
My Account
Cart
OEM 2008 Ford Escape Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Intake Manifolds found
2008 Ford Escape Intake Manifold, Lower Part Number: 3F1Z-9424-AC
Product Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Lower
- Position: Lower
- Replaces: 3F1Z-9424-AA
- Base No.: 9424
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3F1Z-9424-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Intake Manifold Part Number: 5L8Z-9424-A
Product Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold
- Replaces: 5L8Z-9424-BA
- Base No.: 9424
- Item Weight: 9.30 Pounds
- Item Dimensions: 9.3 x 21.6 x 15.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-9424-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Intake Manifold, Upper Part Number: 8L8Z-9424-B
Product Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold, Upper
- Position: Upper
- Replaces: 5L8Z-9424-AA, 8L8Z-9424-A
- Item Weight: 7.80 Pounds
- Item Dimensions: 5.9 x 20.1 x 17.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-9424-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Intake Manifold Part Number: 7M6Z-9424-A
Product Specifications- Other Name: Manifold Assembly - Inlet
- Base No.: 9424
- Item Weight: 9.60 Pounds
- Item Dimensions: 18.9 x 16.8 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7M6Z-9424-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Intake Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Escape Intake Manifold Parts Q&A
- Q: How to service the intake manifold on 2008 Ford Escape?A: The first step for servicing the intake manifold requires placing the vehicle in neutral gear position on a hoist. Initiate the procedure by taking off the fuel rail and throttle body units before disconnecting the oil level indicator together with its attached tube. The power brake booster vacuum tube needs to be removed by pressing the locking ring to unlock it and pulling out the tube from the fitting. The service on the intake manifold begins by disconnecting the fuel vapor return hose from the intake manifold then removing the three bolts which allow positioning of the accelerator cable bracket before securing it with a force of 10 Nm (89 lb-in). The service process requires disconnecting the idle air control (IAC) motor alongside the swirl control valve and both the knock sensor (KS) and temperature manifold absolute pressure (TMAP) sensor as well as the engine oil pressure (EOP) switch electrical connectors while removing any pin-type retainers. Record the locations of various bolts because they have distinct dimensions for proper later installation. Access to disconnect both the crankcase vent hose clamp and EGR tube is possible once the intake manifold is secured to its mounting position by removing the eight bolts. When reinstalling the EGR tube you need to fasten it to 55 Nm (41 lb-ft). End the process by taking out the intake manifold and gaskets and follow the reverse order during reinstallation while checking for new intake manifold gaskets before tightening the intake manifold bolts to 18 Nm (13 lb-ft).