FordParts
My Garage
My Account
Cart
OEM 2008 Ford Escape Throttle Cable
Accelerator Throttle Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Throttle Cables found
2008 Ford Escape Throttle Cable Part Number: 7L8Z-9A758-D
$49.12 MSRP: $91.28You Save: $42.16 (47%)Product Specifications- Other Name: Cable Assembly - Throttle Control
- Base No.: 9A758
- Item Weight: 1.40 Pounds
- Item Dimensions: 19.4 x 15.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L8Z-9A758-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Throttle Cable Part Number: 7L8Z-9A758-C
$37.68 MSRP: $68.81You Save: $31.13 (46%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Cable Assembly - Throttle Control
- Base No.: 9A758
- Item Weight: 3.10 Pounds
- Item Dimensions: 18.4 x 12.1 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L8Z-9A758-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Throttle Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Throttle Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Throttle Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Escape Throttle Cable Parts Q&A
- Q: How to Service and Repair the Throttle Cable on 2008 Ford Escape?A: Performing service or repairs on the accelerator cable requires you to make sure the sliding inner cable, accelerator pedal and pedal shaft stay away from wiring, hoses, sound insulation and floor carpeting because such contacts might stop the accelerator cable movement and affect braking safety resulting in significant injuries. The accelerator pedal alongside the shaft should operate without any resistance during acceleration between idle speed and full throttle. The sliding inner member of the accelerator cable cannot be lubricated and therefore remains non-repairable. Initiate repairs by detaching the accelerator pedal cable followed by the screw then pin-type retainer then accelerator control cover shield which requires tightening to 4 Nm (35 lb-in) at reassembly. For the installation the first step involves disconnecting the accelerator cable from the throttle body followed by compressing the tabs to pull out the cable from the bracket as the bracket screw requires 5 Nm (44 lb-in) torque when initially mounted. The installation process requires first removing the accelerator cable pin-type retainer from the bracket together with extracting the grommet from the dash panel and the accelerator cable. The removal procedure should be done in reverse to finalize the installation.