How to remove and replace the front parking brake cable on 2008 Ford Expedition?

The first step to replace the front parking brake cable demands removal of the parking brake control. The vehicle requires NEUTRAL mode positioning to secure it onto hoisting equipment. Before cable installation secure the front park brake cable P-clip-to-frame bolt at 18 Nm (13 lb-ft). The front parking brake cable installation requires breaking its rubber seal from the front floor pan and compressing the retainer to free the conduit from its bracket before removing cable and conduit from the cable union. Perform the installation of the new cable by executing the steps in reverse order of removal.

OEM 2008 Ford Expedition Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2008 Ford Expedition Rear Cable, Passenger Side
Part Number: AL1Z-2A635-A
$66.28 MSRP: $111.27
You Save: $44.99 (41%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 8L1Z-2A635-A
- Base No.: 2A635A
- Item Weight: 3.90 Pounds
- Item Dimensions: 16.3 x 13.8 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Expedition Front Cable
Part Number: 8L1Z-2853-A
$35.63 MSRP: $49.29
You Save: $13.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Base No.: 2853
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.9 x 8.4 x 19.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L1Z-2853-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford Expedition Rear Cable, Driver Side
Part Number: 7L1Z-2A635-C
$50.49 MSRP: $80.18
You Save: $29.69 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 2L1Z-2A635-AB, 5L1Z-2A635-B, 6L1Z-2A635-AB
- Base No.: 2A635
- Item Weight: 2.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L1Z-2A635-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2008 Ford Expedition Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Expedition Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Expedition Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Expedition Parking Brake Cable Parts Questions & Experts Answers

Q: How to remove and replace the front parking brake cable on 2008 Ford Expedition?
A: The first step to replace the front parking brake cable demands removal of the parking brake control. The vehicle requires NEUTRAL mode positioning to secure it onto hoisting equipment. Before cable installation secure the front park brake cable P-clip-to-frame bolt at 18 Nm (13 lb-ft). The front parking brake cable installation requires breaking its rubber seal from the front floor pan and compressing the retainer to free the conduit from its bracket before removing cable and conduit from the cable union. Perform the installation of the new cable by executing the steps in reverse order of removal.