How to service and repair the front parking brake cable on Ford Expedition?

Service of the front parking brake cable begins with taking out the parking brake control. You must deactivate electrical power to air suspension by enabling the switch near the rear passenger area jack storage to avoid uncontrolled air spring movements while working to protect safety. Position the vehicle on a hoist while keeping it in the neutral gear. Removal of the front park brake cable P-clip-to-frame bolt should be followed by fitting it back into place at 15 Nm (11 ft. lbs.) torque. Detach the front parking brake cable and conduit by first dislodging the rubber seal from the front floor pan then compressing the retaining bracket to free up the conduit before removing the front cable and conduit from the cable union at the end of the process. Complete the installation through reverse execution of the removal process.

How to remove and replace the rear left parking brake cable on Ford Expedition?

The first step to change the rear left parking brake cable involves tension relief from the parking brake cable system. Position the vehicle in a neutral gear on a hoisting system before beginning work. The left rear cable needs to be separated from the equalizer before compressing the two tabs to free the conduit from its bracket. The parking brake cable retainer spring needs proper installation while the cables should stay between suspension links. The first step entails removing the parking brake cable retainer spring from the cable until the left rear cable is free from its retaining clip. The ABS wheel speed sensor wire should be unscrewed from the retaining clip if it exists. First remove the cable from the parking brake actuating lever before taking it out from the left bracket assembly and the parking brake actuating lever. The replacement process can be accomplished by following the steps in reverse order.

OEM Ford Expedition Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Parking Brake Cables found

View related parts
Ford Expedition Front Cable Part Number: F75Z-2853-AA
$26.62 MSRP: $36.82
You Save: $10.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Rear Cable, Passenger Side Part Number: AL1Z-2A635-A
$66.28 MSRP: $111.27
You Save: $44.99 (41%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 8L1Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2017 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Rear Cable Part Number: F75Z-2A635-AA
$41.54 MSRP: $56.53
You Save: $14.99 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
- Manufacturer Note: Cable (brake rear) - LH before 8/16/98 - Includes formed wire hanger
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Rear Cable, Passenger Side Part Number: XL1Z-2A635-AC
$45.48 MSRP: $62.91
You Save: $17.43 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable (brake rear) - RH - from 9/18/98 - includes the connector 2853 to 2A635
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2001 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Rear Cable, Passenger Side Part Number: 6L1Z-2A635-AA
$53.06 MSRP: $73.40
You Save: $20.34 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 2L1Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Front Cable Part Number: 8L1Z-2853-A
$35.63 MSRP: $49.29
You Save: $13.66 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2017 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Rear Cable, Driver Side Part Number: 7L1Z-2A635-C
$50.49 MSRP: $80.18
You Save: $29.69 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Replaces: 2L1Z-2A635-AB, 5L1Z-2A635-B, 6L1Z-2A635-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2017 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Front Cable Part Number: 6L1Z-2853-BB
$58.48 MSRP: $98.00
You Save: $39.52 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 2L1Z-2853-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2007 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL Limited, EL XLT, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Rear Cable, Driver Side Part Number: XL1Z-2A635-AD
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable (brake rear) - LH - from 9/18/98
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2001 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Rear Cable, Passenger Side Part Number: F75Z-2A635-AE
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable (brake rear) - RH - before 9/18/98 - includes the connector 2853 to 2A635
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford Expedition Parking Brake Cable

OEM Parking Brake Cable boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Parking Brake Cable with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Parking brake cable in Ford Expedition is and important bracket that is used in the park brake system of the vehicle which helps to stop the car from rolling when parked and especially if the parking area is inclined. This cable connects the parking brake, referred to also as the emergency brake or handbrake to the braking mechanism to guarantee that the parking brake works efficiently. There could be sundry types of Parking Brake Cable used in the different website ford expedition over the years due to change in operational requirement. A faulty parking brake cable can cause problems such as; inadequate tension when pulled, causing the parking brake not to lock the car firmly in place or inability to pull the parking brake at all if the cable has snapped. The repair and maintenance of the Parking Brake Cable is an important aspect of the Ford Expedition's healthy functionality and security.

Ford Expedition Parking Brake Cable Parts and Q&A

Front Cable
6L1Z-2853-BB
Q: How to service and repair the front parking brake cable on Ford Expedition?
A:
Service of the front parking brake cable begins with taking out the parking brake control. You must deactivate electrical power to Air Suspension by enabling the switch near the rear passenger area jack storage to avoid uncontrolled air spring movements while working to protect safety. Position the vehicle on a hoist while keeping it in the neutral gear. Removal of the front park brake cable P-clip-to-frame bolt should be followed by fitting it back into place at 15 Nm (11 ft. lbs.) torque. Detach the front parking brake cable and conduit by first dislodging the rubber seal from the front floor pan then compressing the retaining bracket to free up the conduit before removing the front cable and conduit from the cable union at the end of the process. Complete the installation through reverse execution of the removal process.
Rear Cable, Passenger Side
AL1Z-2A635-A
Q: How to remove and replace the rear left parking brake cable on Ford Expedition?
A:
The first step to change the rear left parking brake cable involves tension relief from the parking brake cable system. Position the vehicle in a neutral gear on a hoisting system before beginning work. The left rear cable needs to be separated from the equalizer before compressing the two tabs to free the conduit from its bracket. The parking brake cable retainer spring needs proper installation while the cables should stay between suspension links. The first step entails removing the parking brake cable retainer spring from the cable until the left rear cable is free from its retaining clip. The ABS wheel speed sensor wire should be unscrewed from the retaining clip if it exists. First remove the cable from the parking brake actuating lever before taking it out from the left bracket assembly and the parking brake actuating lever. The replacement process can be accomplished by following the steps in reverse order.