FordParts
My Garage
My Account
Cart
OEM 2008 Ford Explorer Sport Trac Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Intake Manifolds found
2008 Ford Explorer Sport Trac Intake Manifold Part Number: 7L2Z-9424-B
$1184.63 MSRP: $1755.00You Save: $570.37 (33%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold
- Replaces: 6L2Z-9424-A
- Base No.: 9424
- Item Weight: 15.10 Pounds
- Item Dimensions: 24.5 x 18.3 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-9424-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Explorer Sport Trac Intake Manifold Part Number: 7L2Z-9424-A
$480.11 MSRP: $705.00You Save: $224.89 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Manifold Assembly - Inlet; Engine Intake Manifold
- Replaced by: 9L3Z-9424-G
- Base No.: 9424
- Item Weight: 21.60 Pounds
- Item Dimensions: 24.2 x 18.9 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-9424-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Explorer Sport Trac Intake Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Sport Trac Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Sport Trac Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Explorer Sport Trac Intake Manifold Parts Q&A
- Q: How to service the intake manifold on 2008 Ford Explorer Sport Trac?A: You should start the intake manifold service process with the removal of the air cleaner (ACL) outlet pipe. The service requires the first step to disconnect the knock sensor (KS) electrical connector followed by removing the PCV tube along with the brake booster vacuum hose and main vacuum harness fitting and evaporative emissions (EVAP) tube and EGR system module electrical connector. First disconnect the wiring harness retainer followed by detaching the EGR system module vacuum fitting then untighten the exhaust manifold-to-EGR system module tube from the EGR system module before securely tightening it to 34 Nm (25 lb-ft) during reinstallation. First remove the nut binding the wiring harness bracket to the electronic TB before disconnecting both the throttle position (TP) sensor electrical connector and electronic throttle body (TB) electrical connector. Reinstall the bracket with 9 Nm (80 lb-in). Tighten bolts, remove the intake manifold and its gaskets while utilizing plastic scraping tools to maintain sealing surfaces free from scratches. Additionally, check the gaskets and replace if needed. The finished installation consists of reinstalling the intake manifold after following steps in the reverse order then tightening its bolts to 11 Nm (8 lb-ft).