How to Remove and Replace Rear Coil Springs on 2008 Ford F-150?

Start by taking off the tire and wheel of the vehicle before elevating the axle with assistance from a suitable jack and continue the process following these steps. Begin by removing the lower bolt and shock absorber nut followed by a sequence of U-bolt plate, four U-bolt nuts, two U-bolts and lastly disposing of this full set of components. The removal of the left rear spring demands that the fuel tank is lowered for access to the spring shackle-to-frame bolt whereas the right rear spring removal requires removing the muffler to access the spring-to-frame bolt. You need to discard three components: spring-to-frame bolt and nut as well as spring shackle-to-frame bolt and nut. Lower the axle until the spring and shackle become removable before you need to discard the spring-to-shackle bolt and nut. Start by positioning the spring and install the shackle-to-spring components with the nut before securing them properly. After the spring shackle-to-frame bolt starts, add the U-bolt plate with U-bolts and nuts until they become snug. The installation of spring-to-frame bolt and nut requires ensuring proper placement of the spacer between the axle and spring before bolt tightening until achieve proper tension. Lay the shock absorber bolt and nut before placing the wheel and tire. Lower the vehicle onto its wheelbase and proceed by tightening the spring shackle-to-frame nut to 133 Nm (98 lb-ft) while the spring-to-shackle nut gets a torque of 133 Nm (98 lb-ft). Users should lift the fuel tank for left rear spring installation but must reinstall the muffler before tightening the spring-to-frame bolt and nut to 350 Nm (258 lb-ft). The U-bolt nuts installation process for light duty vehicles includes four steps of torque: 35 Nm (26 lb-ft) then 70 Nm (52 lb-ft), followed by 100 Nm (74 lb-ft) and completed at 133 Nm (98 lb-ft). Heavy duty vehicles require U-bolt nut tightening at four intervals starting at 63 Nm (46 lb-ft) and gradually increasing to 63 Nm (46 lb-ft), 125 Nm (92 lb-ft), 188 Nm (139 lb-ft) until the final torque of 250 Nm (184 lb-ft). The last step requires tightening the shock absorber lower nut to 90 Nm (66 lb-ft).

OEM 2008 Ford F-150 Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Coil Springs found

View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-V
$117.39 MSRP: $170.87
You Save: $53.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring Code V
- Position: Front
- Replaces: 4L3Z-5310-VA
- Base No.: 5310
- Item Weight: 15.80 Pounds
- Item Dimensions: 22.7 x 12.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-V
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-S
$118.52 MSRP: $172.52
You Save: $54.00 (32%)
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring code S
- Position: Front
- Replaces: 4L3Z-5310-SA
- Base No.: 5310
- Item Weight: 13.20 Pounds
- Item Dimensions: 5.4 x 5.5 x 18.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-S
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-R
$106.05 MSRP: $154.37
You Save: $48.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring Code R
- Position: Front
- Replaces: 4L3Z-5310-RA
- Base No.: 5310
- Item Weight: 15.20 Pounds
- Item Dimensions: 5.5 x 5.5 x 18.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-U
$116.38 MSRP: $169.40
You Save: $53.02 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Air Suspension Spring, Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring code U
- Position: Front
- Replaces: 4L3Z-5310-UA
- Base No.: 5310
- Item Weight: 15.20 Pounds
- Item Dimensions: 5.4 x 5.5 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-U
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-Z
$86.88 MSRP: $120.19
You Save: $33.31 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring code Z
- Position: Front
- Base No.: 5310
- Item Weight: 16.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-Z
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-N
$97.48 MSRP: $134.86
You Save: $37.38 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Manufacturer Note: Spring Code N
- Position: Front
- Replaces: 4L3Z-5310-NA
- Base No.: 5310
- Item Weight: 16.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Spring, Front Part Number: 4L3Z-5310-CA
$81.84 MSRP: $113.22
You Save: $31.38 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs
- Manufacturer Note: Spring Code CA
- Position: Front
- Base No.: 5310
- Item Weight: 14.60 Pounds
- Item Dimensions: 27.6 x 8.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 4L3Z-5310-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Spring, Front Part Number: 4L3Z-5310-BA
$28.87 MSRP: $39.94
You Save: $11.07 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs
- Manufacturer Note: Spring Code BA
- Position: Front
- Base No.: 5310
- Item Weight: 14.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 4L3Z-5310-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-T
$111.84 MSRP: $162.80
You Save: $50.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Air Suspension Spring, Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring Code T
- Position: Front
- Replaces: 4L3Z-5310-TA
- Base No.: 5310
- Item Weight: 15.50 Pounds
- Item Dimensions: 5.5 x 5.3 x 17.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-T
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-Y
$140.02 MSRP: $216.08
You Save: $76.06 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring code Y
- Position: Front
- Replaces: 4L3Z-5310-YA
- Base No.: 5310
- Item Weight: 15.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-Y
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-A
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Manufacturer Note: Spring Code AA
- Position: Front
- Replaces: 4L3Z-5310-AA
- Base No.: 5310
- Item Weight: 15.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-P
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Manufacturer Note: Spring code P
- Position: Front
- Replaces: 4L3Z-5310-PA
- Base No.: 5310
- Item Weight: 14.60 Pounds
- Item Dimensions: 5.6 x 5.5 x 18.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-P
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 4L3Z-5310-MA
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Manufacturer Note: Spring code M
- Position: Front
- Base No.: 5310
- Item Weight: 11.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 4L3Z-5310-MA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-150 Coil Spring, Front Part Number: 8L3Z-5310-X
$111.07 MSRP: $161.67
You Save: $50.60 (32%)
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Manufacturer Note: Spring code X
- Position: Front
- Replaces: 4L3Z-5310-XA
- Base No.: 5310
- Item Weight: 15.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8L3Z-5310-X
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L CNG, 6 Cyl 3.7 L FLEX, 6 Cyl 3.7 L LPG, 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L FLEX, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L GAS

2008 Ford F-150 Coil Springs

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-150 Coil Springs available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-150 Coil Springs as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-150 Coil Springs Parts Q&A

Q: How to Remove and Replace Rear Coil Springs on 2008 Ford F-150?
A: Start by taking off the tire and wheel of the vehicle before elevating the axle with assistance from a suitable jack and continue the process following these steps. Begin by removing the lower bolt and shock absorber nut followed by a sequence of U-bolt plate, four U-bolt nuts, two U-bolts and lastly disposing of this full set of components. The removal of the left rear spring demands that the fuel tank is lowered for access to the spring shackle-to-frame bolt whereas the right rear spring removal requires removing the muffler to access the spring-to-frame bolt. You need to discard three components: spring-to-frame bolt and nut as well as spring shackle-to-frame bolt and nut. Lower the axle until the spring and shackle become removable before you need to discard the spring-to-shackle bolt and nut. Start by positioning the spring and install the shackle-to-spring components with the nut before securing them properly. After the spring shackle-to-frame bolt starts, add the U-bolt plate with U-bolts and nuts until they become snug. The installation of spring-to-frame bolt and nut requires ensuring proper placement of the spacer between the axle and spring before bolt tightening until achieve proper tension. Lay the shock absorber bolt and nut before placing the wheel and tire. Lower the vehicle onto its wheelbase and proceed by tightening the spring shackle-to-frame nut to 133 Nm (98 lb-ft) while the spring-to-shackle nut gets a torque of 133 Nm (98 lb-ft). Users should lift the fuel tank for left rear spring installation but must reinstall the muffler before tightening the spring-to-frame bolt and nut to 350 Nm (258 lb-ft). The U-bolt nuts installation process for light duty vehicles includes four steps of torque: 35 Nm (26 lb-ft) then 70 Nm (52 lb-ft), followed by 100 Nm (74 lb-ft) and completed at 133 Nm (98 lb-ft). Heavy duty vehicles require U-bolt nut tightening at four intervals starting at 63 Nm (46 lb-ft) and gradually increasing to 63 Nm (46 lb-ft), 125 Nm (92 lb-ft), 188 Nm (139 lb-ft) until the final torque of 250 Nm (184 lb-ft). The last step requires tightening the shock absorber lower nut to 90 Nm (66 lb-ft).