How to service and repair the evaporative emission canister purge valve with midship, aft-of-axle, or auxiliary fuel tanks on 2008 Ford F-250 Super Duty?

A procedure to repair or service the evaporative emission canister purge valve requires disconnecting the battery ground cable first to stop electrical sparks that might ignite fuel vapors, which presents a fire hazard on vehicles with midship or aft-of-axle or auxiliary fuel tanks. The repair service starts with connector removal from the EVAP canister purge solenoid, followed by intake manifold coupling to EVAP canister purge valve vapor tube through quick connect coupling that is also applied to EVAP canister assembly to valve vapor tube. The EVAP canister purge valve needs to be detached from its support bracket. Reinstallation of the new valve requires the opposite order of removal. Perform the EVAP repair verification drive cycle and check for leaks on the EVAP system after completing the installation process.

OEM 2008 Ford F-250 Super Duty Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Canister Purge Valves found

View related parts
2008 Ford F-250 Super Duty Solenoid Valve
Part Number: 9U5Z-9F945-C
$46.60 MSRP: $72.73
You Save: $26.13 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly, Evaporative Emissions Adapter, Check Valve, Canister Purge Valve, PCV Hose, EGR Tube; Purge Solenoid; Solenoid Connector; Vent Control Solenoid; Tube; Solenoid; Filter; Elbow
- Replaces: 7U5Z-9F945-E
- Base No.: 9F945
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.4 x 7.3 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9U5Z-9F945-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
2008 Ford F-250 Super Duty Purge Valve
Part Number: 7U5Z-9C915-C
$77.44 MSRP: $122.96
You Save: $45.52 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Control Valve
- Manufacturer Note: Valve Only
- Base No.: 9C915
- Item Weight: 1.10 Pounds
- Item Dimensions: 5.5 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7U5Z-9C915-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2008 Ford F-250 Super Duty Canister Purge Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-250 Super Duty Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-250 Super Duty Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-250 Super Duty Canister Purge Valve Parts Questions & Experts Answers

Q: How to service and repair the evaporative emission canister purge valve with midship, aft-of-axle, or auxiliary fuel tanks on 2008 Ford F-250 Super Duty?
A: A procedure to repair or service the evaporative emission canister purge valve requires disconnecting the battery ground cable first to stop electrical sparks that might ignite fuel vapors, which presents a fire hazard on vehicles with midship or aft-of-axle or auxiliary fuel tanks. The repair service starts with connector removal from the EVAP canister purge solenoid, followed by intake manifold coupling to EVAP canister purge valve vapor tube through quick connect coupling that is also applied to EVAP canister assembly to valve vapor tube. The EVAP canister purge valve needs to be detached from its support bracket. Reinstallation of the new valve requires the opposite order of removal. Perform the EVAP repair verification drive cycle and check for leaks on the EVAP system after completing the installation process.