How should the radius arm be serviced on F-250 and F-350 to avoid significant service costs on 2008 Ford F-250 Super Duty?

Servicing the radius arm of F-250 and F-350 ranges requires proper care of suspension fasteners because their failure produces high maintenance expenses. Only new fasteners accepted for installation must use parts with identical numbers or approved equivalent choices since inferior or alternative designs remain unacceptable. The correct retention of assembly parts requires following precise torque settings. Start by removing the spring before discarding the front nut along with bolt from the radius arm and adding new ones while tightening them to 400 Nm (295 ft. lbs.). The next step requires you to pull out and discard the radius arm rear nut and bolt while paying attention to tightening the new rear nut at curb height level to protect the bushing and achieve a torque value of 300 Nm (222 ft. lbs.). Complete the replacement by reversing all steps used during removal of the radius arm.

OEM 2008 Ford F-250 Super Duty Radius Arm

Front Suspension Radius Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Radius Arms found

View related parts
2008 Ford F-250 Super Duty Radius Arm, Front Passenger Side Part Number: GC3Z-3A360-B
$262.19 MSRP: $385.00
You Save: $122.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Adjustment; Radius Arm, Front Right
- Position: Front Passenger Side
- Replaces: 6C3Z-3A360-AC, 9C3Z-3A360-B, 9C3Z-3A360-D
- Item Weight: 21.00 Pounds
- Item Dimensions: 4.9 x 41.6 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: GC3Z-3A360-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL
View related parts
2008 Ford F-250 Super Duty Radius Arm, Front Passenger Side Part Number: 7C3Z-3A360-D
$317.80 MSRP: $466.67
You Save: $148.87 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Adjustment; Radius Arm, Front Right
- Position: Front Passenger Side
- Replaces: 7C3Z-3A360-B, 7C3Z-3A360-AB
- Base No.: 3A360
- Item Weight: 24.00 Pounds
- Item Dimensions: 9.5 x 6.2 x 40.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A360-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
2008 Ford F-250 Super Duty Radius Arm, Front Driver Side Part Number: 7C3Z-3A360-C
$230.41 MSRP: $338.33
You Save: $107.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Adjustment; Radius Arm, Front Left
- Position: Front Driver Side
- Base No.: 3A360
- Item Weight: 25.70 Pounds
- Item Dimensions: 9.3 x 6.2 x 41.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A360-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
2008 Ford F-250 Super Duty Radius Arm, Front Driver Side Part Number: 7C3Z-3A360-AC
Product Specifications
- Other Name: Arm - Adjustment; Radius Arm, Front Left
- Position: Front Driver Side
- Replaces: 7C3Z-3A360-A
- Base No.: 3A360
- Item Weight: 23.90 Pounds
- Item Dimensions: 42.0 x 8.5 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-3A360-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL, 8 Cyl 7.3 L DIESEL

2008 Ford F-250 Super Duty Radius Arm

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-250 Super Duty Radius Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-250 Super Duty Radius Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-250 Super Duty Radius Arm Parts Q&A

Q: How should the radius arm be serviced on F-250 and F-350 to avoid significant service costs on 2008 Ford F-250 Super Duty?
A: Servicing the radius arm of F-250 and F-350 ranges requires proper care of suspension fasteners because their failure produces high maintenance expenses. Only new fasteners accepted for installation must use parts with identical numbers or approved equivalent choices since inferior or alternative designs remain unacceptable. The correct retention of assembly parts requires following precise torque settings. Start by removing the spring before discarding the front nut along with bolt from the radius arm and adding new ones while tightening them to 400 Nm (295 ft. lbs.). The next step requires you to pull out and discard the radius arm rear nut and bolt while paying attention to tightening the new rear nut at curb height level to protect the bushing and achieve a torque value of 300 Nm (222 ft. lbs.). Complete the replacement by reversing all steps used during removal of the radius arm.