How to service the right-hand exhaust manifold on 2008 Ford F-350 Super Duty?

The right-hand exhaust manifold service requires positioning the vehicle at neutral on a hoist as the first step. The first step includes separate removal of the starter and right-hand inner fenderwell. Apply torque to 40 Nm (30 lb-ft) when installing new exhaust manifold nuts which secure it to the catalytic converter. First remove the exhaust manifold heat shield together with its two bolts but reinstall them with new bolts that require a torque of 10 Nm (89 lb-inch). Remove the exhaust manifold from the cylinder head by detaching its eight nuts and studs while discarding these parts for replacement. The installation of new studs needs to be tightened to 12 Nm (9 lb-ft) at the same time as new nuts are tightened to 25 Nm (18 lb-ft) following the specified sequence. A plastic scraper and Motorcraft Metal Surface Prep solution must be used according to product directions instead of steel tools to clean sealing surfaces. After inspection of the exhaust manifold finish the installation by reversing all removal steps.

OEM 2008 Ford F-350 Super Duty Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Exhaust Manifolds found

View related parts
2008 Ford F-350 Super Duty Exhaust Manifold Part Number: 8C3Z-9430-A
$206.07 MSRP: $302.60
You Save: $96.53 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Base No.: 9430
- Item Weight: 10.10 Pounds
- Item Dimensions: 9.5 x 5.4 x 22.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8C3Z-9430-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-350 Super Duty Exhaust Manifold, Driver Side Part Number: 7C3Z-9431-B
$102.71 MSRP: $149.50
You Save: $46.79 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 5C3Z-9431-BA
- Base No.: 9430B
- Item Weight: 13.60 Pounds
- Item Dimensions: 7.3 x 6.6 x 18.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-9431-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-350 Super Duty Exhaust Manifold, Driver Side Part Number: 7C3Z-9431-A
$794.25 MSRP: $1176.67
You Save: $382.42 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: MANIFOLD, EXH LH
- Position: Driver Side
- Base No.: 9430
- Item Weight: 18.70 Pounds
- Item Dimensions: 24.7 x 9.8 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-9431-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2008 Ford F-350 Super Duty Exhaust Manifold, Passenger Side Part Number: 7C3Z-9430-E
$794.25 MSRP: $1176.67
You Save: $382.42 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Manufacturer Note: MANIFOLD, EXH RH
- Position: Passenger Side
- Replaces: CC3Z-9430-A, CC3Z-9430-B
- Base No.: 9430
- Item Weight: 19.40 Pounds
- Item Dimensions: 26.3 x 10.4 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-9430-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2008 Ford F-350 Super Duty Exhaust Manifold Part Number: 7C3Z-9430-A
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left, Right; Manifold
- Base No.: 9430
- Item Weight: 12.80 Pounds
- Item Dimensions: 25.1 x 9.2 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-9430-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS

2008 Ford F-350 Super Duty Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-350 Super Duty Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-350 Super Duty Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-350 Super Duty Exhaust Manifold Parts Q&A

Q: How to service the right-hand exhaust manifold on 2008 Ford F-350 Super Duty?
A: The right-hand exhaust manifold service requires positioning the vehicle at neutral on a hoist as the first step. The first step includes separate removal of the starter and right-hand inner fenderwell. Apply torque to 40 Nm (30 lb-ft) when installing new exhaust manifold nuts which secure it to the catalytic converter. First remove the exhaust manifold heat shield together with its two bolts but reinstall them with new bolts that require a torque of 10 Nm (89 lb-inch). Remove the exhaust manifold from the cylinder head by detaching its eight nuts and studs while discarding these parts for replacement. The installation of new studs needs to be tightened to 12 Nm (9 lb-ft) at the same time as new nuts are tightened to 25 Nm (18 lb-ft) following the specified sequence. A plastic scraper and Motorcraft Metal Surface Prep solution must be used according to product directions instead of steel tools to clean sealing surfaces. After inspection of the exhaust manifold finish the installation by reversing all removal steps.