How to Service and Repair an Y-Exhaust Pipe on Gasoline Engines on 2008 Ford F-350 Super Duty?

The repair process of the exhaust Y-pipe requires a vehicle in NEUTRAL position while located on a hoist. You should disconnect both heated oxygen sensors (HO2S) as well as both catalyst monitor sensor electrical connectors. Two exhaust Y-pipe flange bolts need removal followed by assistance in taking off the four exhaust manifold-to-exhaust Y-pipe nuts and exhaust Y-pipe assembly from the vehicle before discarding the nuts. First install the new exhaust Y-pipe into the vehicle and then loosely mount the four exhaust Y-pipe-to-exhaust manifold nuts followed by loosely adding the two exhaust Y-pipe flange bolts. After aligning the exhaust Y-pipe for maximum clearance to surrounding parts, tighten the LH exhaust manifold-to-exhaust Y-pipe nuts starting with the lower one to 20 Nm (177 lb-inch) followed by the upper one to 40 Nm (30 lb-ft) then the lower one again to 40 Nm (30 lb-ft). Utilize this sequence to fasten the RH exhaust manifold-to-exhaust Y-pipe nuts where the lower nut should be tightened to 20 Nm (177 lb-inch), followed by upper nut tightening to 40 Nm (30 lb-ft), completing the process with lower nut tightening to 40 Nm (30 lb-ft). Complete the repair by fastening the two exhaust Y-pipe flange bolts at 40 Nm (30 lb-ft) torque setting and restoring hook-up of the HO2S and catalyst monitor sensors' electrical connectors. The exhaust system alignment procedure should be conducted if the exhaust system isolators maintain any other value than zero load.

OEM 2008 Ford F-350 Super Duty Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Exhaust Pipes found

View related parts
2008 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-SC
$161.22 MSRP: $210.15
You Save: $48.93 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Exhaust Pipe Connector; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 10.70 Pounds
- Item Dimensions: 6.1 x 8.2 x 36.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-SC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-350 Super Duty Front Pipe
Part Number: 7C3Z-5246-A
$253.45 MSRP: $333.28
You Save: $79.83 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit
- Position: Front
- Replaces: 7C3Z-5246-AC
- Base No.: 5246
- Item Weight: 10.10 Pounds
- Item Dimensions: 38.5 x 7.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5246-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-350 Super Duty Exhaust Pipe, Front
Part Number: 7C3Z-6N646-B
$187.70 MSRP: $289.67
You Save: $101.97 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Intermediate Pipe, Front; Tail Pipe; Front Pipe; Duct - Air
- Position: Front
- Replaces: 7C3Z-6N646-A
- Base No.: 6N646
- Item Weight: 13.80 Pounds
- Item Dimensions: 40.8 x 10.9 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-6N646-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-350 Super Duty Intermediate Pipe, Center
Part Number: BC3Z-5A212-AL
$154.92 MSRP: $201.94
You Save: $47.02 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Exhaust Pipe; Exhaust Crossover Pipe, Center; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe
- Manufacturer Note: Less Resonator
- Position: Center
- Replaces: 7C3Z-5A212-CA, BC3Z-5A212-F, BC3Z-5A212-AA
- Base No.: 5A212
- Item Weight: 8.60 Pounds
- Item Dimensions: 4.7 x 32.8 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-5A212-AL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Ford F-350 Super Duty Intermediate Pipe, Center
Part Number: BC3Z-5A212-A
$122.17 MSRP: $159.25
You Save: $37.08 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Exhaust Pipe; Exhaust Crossover Pipe, Center; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe
- Manufacturer Note: Less Resonator
- Position: Center
- Replaces: 7C3Z-5A212-AA
- Base No.: 5A212
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-5A212-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-PC
$134.77 MSRP: $175.67
You Save: $40.90 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 8.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-PC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-NA
$107.31 MSRP: $139.88
You Save: $32.57 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 6.70 Pounds
- Item Dimensions: 29.6 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-NA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-MA
$71.18 MSRP: $97.91
You Save: $26.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 4.00 Pounds
- Item Dimensions: 6.9 x 5.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-MA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-350 Super Duty Intermediate Pipe
Part Number: BC3Z-5A212-C
Product Specifications
- Other Name: Extension - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Intermed Pipe
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-5A212-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-350 Super Duty Tailpipe Extension
Part Number: 8C3Z-5K238-A
Product Specifications
- Other Name: Extension - Exhaust Pipe; Exhaust Tail Pipe Tip; Exhaust System; Exhaust Pipe; Tail Pipe
- Manufacturer Note: Chrome Finish
- Replaces: 8C3Z-5255-A
- Base No.: 5202
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-5K238-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2008 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-BA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 6.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2008 Ford F-350 Super Duty Exhaust Pipe

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-350 Super Duty Exhaust Pipe available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-350 Super Duty Exhaust Pipe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-350 Super Duty Exhaust Pipe Parts Questions & Experts Answers

Q: How to Service and Repair an Y-Exhaust Pipe on Gasoline Engines on 2008 Ford F-350 Super Duty?
A: The repair process of the exhaust Y-pipe requires a vehicle in NEUTRAL position while located on a hoist. You should disconnect both heated oxygen sensors (HO2S) as well as both catalyst monitor sensor electrical connectors. Two exhaust Y-pipe flange bolts need removal followed by assistance in taking off the four exhaust manifold-to-exhaust Y-pipe nuts and exhaust Y-pipe assembly from the vehicle before discarding the nuts. First install the new exhaust Y-pipe into the vehicle and then loosely mount the four exhaust Y-pipe-to-exhaust manifold nuts followed by loosely adding the two exhaust Y-pipe flange bolts. After aligning the exhaust Y-pipe for maximum clearance to surrounding parts, tighten the LH exhaust manifold-to-exhaust Y-pipe nuts starting with the lower one to 20 Nm (177 lb-inch) followed by the upper one to 40 Nm (30 lb-ft) then the lower one again to 40 Nm (30 lb-ft). Utilize this sequence to fasten the RH exhaust manifold-to-exhaust Y-pipe nuts where the lower nut should be tightened to 20 Nm (177 lb-inch), followed by upper nut tightening to 40 Nm (30 lb-ft), completing the process with lower nut tightening to 40 Nm (30 lb-ft). Complete the repair by fastening the two exhaust Y-pipe flange bolts at 40 Nm (30 lb-ft) torque setting and restoring hook-up of the HO2S and catalyst monitor sensors' electrical connectors. The exhaust system alignment procedure should be conducted if the exhaust system isolators maintain any other value than zero load.