OEM 2008 Ford Focus Automatic Transmission Shift Levers

2008 Ford Focus Automatic Transmission Shift Levers Parts Q&A

• Q: How to Service and Repair Automatic Transmission Shift Levers on 2008 Ford Focus?

  A: The initial step to work on an automatic transmission shifter includes removing the floor console. First move the automatic transmission shift lever to park then fully detach the shift lever cable from the shift lever by making the ball stud removal followed by tab compression to break the assembly grip. Start by disconnecting the electrical connector attached to the shift lever assembly and remove the four nuts mounting that assembly. The shift lever assembly needs to be placed into position before securing it with four nuts that should be tightened to 9 Nm (80 inch lbs.). The electrical connector should be reattached to the shift lever assembly. Basic installation of the shift lever cable demands securing the locking tabs while achieving proper ball stud attachment of the cable end. The bracket lock will become visible through the cable entry point as you press the cable in. Finish by checking the lock is engaged. Move the shift lever to drive and install the shift lever cable onto the lever as well as the ball stud. To finish installation you should replace the floor console followed by adjusting the shift lever cable if required.