How to remove and replace the front bumper cover on 2008 Ford Focus?

The front bumper cover removal procedure starts with unfastening the radiator grille through its 4 pin-type retainers followed by taking out the grille. Put the car into neutral mode before hoisting the vehicle for enhanced installation space. You should detach the radiator lower air deflector followed by removing the 6 pushpins which secure the fender splash shield. Using caution detach the pin-type retainer that secure the fog lamp wiring harness and place it to the side. The bumper cover is separated from retaining brackets as you remove its 2 upper pin-type retainers from the cover starting closest to the wheel well area. Follow the backward installation process used for removal when putting on the new bumper cover.

OEM 2008 Ford Focus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2008 Ford Focus Bumper Cover, Rear Part Number: 8S4Z-17K835-ABPTM
$209.41 MSRP: $326.18
You Save: $116.77 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 8S4Z-17K835-AAPTM
- Base No.: 17K835
- Item Weight: 15.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-17K835-ABPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2008 Ford Focus Impact Bar, Rear Part Number: 8S4Z-17906-C
$116.69 MSRP: $169.85
You Save: $53.16 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Base No.: 17906
- Item Weight: 13.80 Pounds
- Item Dimensions: 7.5 x 6.2 x 52.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-17906-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2008 Ford Focus Impact Bar, Front Part Number: 8S4Z-17757-A
$74.72 MSRP: $114.98
You Save: $40.26 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Base No.: 17757
- Item Weight: 14.30 Pounds
- Item Dimensions: 6.4 x 49.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS
View related parts
2008 Ford Focus Bumper Cover, Front Part Number: 8S4Z-17D957-APTM
$369.29
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 19.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-17D957-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2008 Ford Focus Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Focus Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Focus Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Focus Bumper Parts Q&A

Q: How to remove and replace the front bumper cover on 2008 Ford Focus?
A: The front bumper cover removal procedure starts with unfastening the radiator grille through its 4 pin-type retainers followed by taking out the grille. Put the car into neutral mode before hoisting the vehicle for enhanced installation space. You should detach the radiator lower air deflector followed by removing the 6 pushpins which secure the fender splash shield. Using caution detach the pin-type retainer that secure the fog lamp wiring harness and place it to the side. The bumper cover is separated from retaining brackets as you remove its 2 upper pin-type retainers from the cover starting closest to the wheel well area. Follow the backward installation process used for removal when putting on the new bumper cover.