How to service the knock sensor (KS) on 2008 Ford Focus?

The service procedure for the knock sensor (KS) begins by removing the intake manifold. The knock sensor installation must avoid touching the crankcase vent oil separator during the operation. The bolt must be removed first then the knock sensor should be extracted. The new sensor must be tightened to 20 Nm (15 lb-ft) following the sensor removal steps for proper installation.

OEM 2008 Ford Focus Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2008 Ford Focus Knock Sensor
Part Number: 1S7Z-12A699-BB
$44.85 MSRP: $70.00
You Save: $25.15 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Engine Knock; Ignition Knock (Detonation) Sensor; Sensor
- Replaces: 1S7Z-12A699-BA
- Base No.: 12A699
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-12A699-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- RS, S, SE, SEL, SES, ST, SVT, Titanium, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2008 Ford Focus Knock Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Focus Knock Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Focus Knock Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Focus Knock Sensor Parts Questions & Experts Answers

Q: How to service the knock sensor (KS) on 2008 Ford Focus?
A: The service procedure for the knock sensor (KS) begins by removing the intake manifold. The knock sensor installation must avoid touching the crankcase vent oil separator during the operation. The bolt must be removed first then the knock sensor should be extracted. The new sensor must be tightened to 20 Nm (15 lb-ft) following the sensor removal steps for proper installation.