FordParts
My Garage
My Account
Cart
OEM 2008 Ford Fusion Differential Cover
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Differential Cover found
2008 Ford Fusion Differential Cover, Rear Part Number: 7E5Z-4033-A
$88.04 MSRP: $128.15You Save: $40.11 (32%)Product Specifications- Other Name: Cover - Rear Axle Housing; Differential Cover, Rear; Axle Cover; Rear Cover; Differential Assy Cover; Cover
- Position: Rear
- Base No.: 4033
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.2 x 10.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-4033-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Fusion Differential Cover
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Fusion Differential Cover available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Fusion Differential Cover as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Fusion Differential Cover Parts Q&A
- Q: How to Service and Repair the Differential Cover on 2008 Ford Fusion?A: Service and repair operations on the differential housing cover need to start with a vehicle placement on a hoist in neutral gear. The housing requires 10 bolts for removal before you drain all differential fluid inside. Clean all machined surfaces on the rear axle housing and differential housing cover with brand-new silicone sealant while maintaining protection of the rear axle interior from potential damage. It is necessary to leave the differential vent on the rear cover open without any hindrances. The installation of differential housing cover must happen within 15 minutes after applying clear silicone rubber along the mating surfaces or the technician must start over with new sealant. Secure the installed cover by using 10 bolts and tighten them to 23 Nm (17 lb-ft). The rear axle requires 1.15L (2.43 pt) of rear axle lubricant which should reach 3-5 mm (0.118-0.196 in) below the bottom of the filler hole before reinstallation with a torque of 29 Nm (21 lb-ft).