OEM 2008 Ford Mustang Automatic Transmission Filter

2008 Ford Mustang Automatic Transmission Filter Parts Q&A

• Q: How to Service and Repair the In-Line Automatic Transmission Filter on 2008 Ford Mustang?

  A: One must put a new in-line fluid filter in place before servicing the transmission fluid in-line filter particularly when dealing with vehicles that undergone transmission overhaul. The vehicle requires an installation of a new in-line fluid filter kit if it lacks built-in in-line fluid filtration. Throughout non-internal repair operations it remains improper to implement an in-line filter or filter kit installation. The installation of new or Ford-authorized remanufactured transmissions requires using the provided in-line transmission fluid filter. Position the vehicle on a neutral gear of a hoist before proceeding. The installation of the in-line filter requires cutting a portion from the upper transmission fluid cooler hose. Correct installation of the filter requires a proper positioning with the red arrow facing toward the transmission while pointing away from the transmission fluid cooler because improper installation might harm the internal transmission components. It is essential to install the filter only through rubber hoses or steel tubing when their entrance angle remains under 60 degrees. The rubber hose connection to the filter begins with clamp attachment to one end followed by the hose attachment on the other end. Both hose clamps should be tightened. A visible segment of the transmission fluid pan requires cleaning before attaching a sticker indicating the presence of an in-line filter. The completion of the process includes filling the transmission with automatic transmission fluid while verifying operational health alongside leak detection of the filter.