How to Service and Repair the ABS Control Module on 2008 Ford Ranger?

The Electronic Brake Control Module service process requires hydraulic control unit (HCU) removal as the first step. Apply a specific order when removing the four ABS module bolts from the specified area then tighten them to 3 Nm (27 lb-inch) when reassembly. Caution is required when splitting the ABS module from the HCU because the motor terminals along with valve stems become accessible and need proper protection against damage. The O-ring seals and ABS module seal go into disposal after removing the ABS module. Begin installation only if all components show no sign of dust contamination as well as oil fluid while using new seal kit components to ensure proper sealing between ABS module and HCU. Before new seal placement on the valve flange, check and normalize the O-ring seals while also cleaning the ABS module groove. To finish the installation you should execute an inverse sequence of steps used for removal.

OEM 2008 Ford Ranger ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Control Modules found

View related parts
2008 Ford Ranger Control Module
Part Number: 4L5Z-2C286-AA
Product Specifications
- Other Name: Module; ABS Hydraulic Assembly; ABS Control Module; Modulator Valve; ABS Control Unit
- Replaces: 4L5Z-2C215-AA
- Base No.: 2C286
- Item Weight: 4.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2C286-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Control Module
Part Number: 4L5Z-2C219-BA
Product Specifications
- Other Name: Kit - Repair; ABS Control Module
- Base No.: 2C219
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2C219-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Control Module
Part Number: 4L5Z-2C219-AA
Product Specifications
- Other Name: Module - ABS Control; ABS Control Module
- Base No.: 2C219
- Item Weight: 1.60 Pounds
- Item Dimensions: 13.4 x 10.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2C219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2008 Ford Ranger ABS Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger ABS Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger ABS Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger ABS Control Module Parts Questions & Experts Answers

Q: How to Service and Repair the ABS Control Module on 2008 Ford Ranger?
A: The Electronic Brake Control Module service process requires hydraulic control unit (HCU) removal as the first step. Apply a specific order when removing the four ABS module bolts from the specified area then tighten them to 3 Nm (27 lb-inch) when reassembly. Caution is required when splitting the ABS module from the HCU because the motor terminals along with valve stems become accessible and need proper protection against damage. The O-ring seals and ABS module seal go into disposal after removing the ABS module. Begin installation only if all components show no sign of dust contamination as well as oil fluid while using new seal kit components to ensure proper sealing between ABS module and HCU. Before new seal placement on the valve flange, check and normalize the O-ring seals while also cleaning the ABS module groove. To finish the installation you should execute an inverse sequence of steps used for removal.