Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
Edge, FX4, Lariat, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
Other Name: Bulb; Turn Signal & Parking Light Bulb, Front; Rear; Side Marker; Headlight; Back Up; Brake; Tail Light Bulbs; Backup Lamp Bulb; Signal Lamp Bulb; Parking Lamp Bulb; Stop Lamp Bulb; Exterior Bulbs
Position: Front
Replaces: F5AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: YR3Z-13466-AD
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
2008 Ford Ranger Fog Light Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Fog Light Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Fog Light Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Ranger Fog Light Bulb Parts Questions & Experts Answers
Q: How to Service the Fog Light Bulb on 2008 Ford Ranger?
A: Begin servicing the fog lamp bulb by confirming the headlamp switch together with the ignition switch are in the OFF position. Place the vehicle in NEUTRAL position then position it on the hoist. The electrical connector should be disconnected while removing the fog lamp bulb by holding its base only because high pressure gas inside makes the bulb dangerous to handle. The performance of the bulb gets affected by contaminants which settle on the lens and reflector when the bulb remains removed for an extended period. Touching the glass envelope should always be avoided and the bulb should never stay uninstalled for prolonged times. The fog lights should always remain off whenever the bulb is not installed in the vehicle. Install the new bulb through an opposite procedure when replacing it.