How to service and repair the muffler and tailpipe on 2008 Ford Ranger?

A service or repair of the muffler and tailpipe should start with the vehicle placed in neutral position on a hoist. Before proceeding with 2.3L vehicles one must remove assembly bolts and flagnuts with gasket then discard the flagnuts and gasket. The exhaust Y-pipe-to-muffler and tailpipe assembly bolts along with flagnuts and gasket need removal on vehicles equipped with 3.0L and 4.0L engines. Discard all three components when finished. Micro-size pliers detach the three rubber isolators while the muffler and tailpipe assembly needs to be taken out completely. When installing the isolators use lubricants free of oil or grease because such substances can deteriorate rubber leading to exhaust hanger bracket separation. Position the muffler and tailpipe assembly correctly in the vehicle while installing the three rubber isolators following surface cleaning of all mating points. The 2.3L engine installation requires a brand-new exhaust downpipe-to-muffler and tailpipe assembly gasket but also includes exhaust downpipe-to-muffler and tailpipe assembly bolts with new flagnuts for application of 40 Nm (30 lb-ft) torque. Attach a new gasket on the RH side of the exhaust Y-pipe-to-muffler and tailpipe assembly before securing its bolts and new flagnuts with 40 Nm (30 lb-ft) torque. Finish the procedure by confirming the exhaust system isolators have no load present. Follow with the exhaust system alignment when necessary.

OEM 2008 Ford Ranger Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Mufflers found

View related parts
2008 Ford Ranger Muffler & Pipe, Front Part Number: 7L5Z-5230-E
$232.32 MSRP: $321.40
You Save: $89.08 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Front
- Replaces: 4L5Z-5230-HA, 5L5Z-5230-D, 5L5Z-5230-EA
- Base No.: 5230
- Item Weight: 29.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-5230-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Muffler & Pipe, Front Part Number: 7L5Z-5230-F
$479.42 MSRP: $630.45
You Save: $151.03 (24%)
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Front
- Replaces: 5L5Z-5230-JA, 5L5Z-5230-FA, 4L5Z-5230-JA, 4L5Z-5230-FA
- Base No.: 5230
- Item Weight: 29.30 Pounds
- Item Dimensions: 93.6 x 10.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-5230-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Muffler & Pipe, Rear Part Number: 7L5Z-5230-A
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Position: Rear
- Replaces: 5L5Z-5230-A
- Base No.: 5230
- Item Weight: 28.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-5230-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2008 Ford Ranger Muffler & Pipe, Front Part Number: 7L5Z-5230-B
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Front
- Replaces: 5L5Z-5230-B
- Base No.: 5230
- Item Weight: 28.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-5230-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2008 Ford Ranger Muffler & Pipe, Rear Part Number: 7L5Z-5230-D
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Exhaust Pipe; Muffler; Muffler And Pipe Assembly - Rear
- Position: Rear
- Replaces: 4L5Z-5230-GA, 5L5Z-5230-DA
- Base No.: 5230
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-5230-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Ranger Muffler & Pipe, Rear Part Number: 7L5Z-5230-C
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Rear
- Replaces: 5L5Z-5230-C
- Base No.: 5230
- Item Weight: 29.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-5230-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS

2008 Ford Ranger Muffler

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Muffler available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Muffler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger Muffler Parts Q&A

Q: How to service and repair the muffler and tailpipe on 2008 Ford Ranger?
A: A service or repair of the muffler and tailpipe should start with the vehicle placed in neutral position on a hoist. Before proceeding with 2.3L vehicles one must remove assembly bolts and flagnuts with gasket then discard the flagnuts and gasket. The exhaust Y-pipe-to-muffler and tailpipe assembly bolts along with flagnuts and gasket need removal on vehicles equipped with 3.0L and 4.0L engines. Discard all three components when finished. Micro-size pliers detach the three rubber isolators while the muffler and tailpipe assembly needs to be taken out completely. When installing the isolators use lubricants free of oil or grease because such substances can deteriorate rubber leading to exhaust hanger bracket separation. Position the muffler and tailpipe assembly correctly in the vehicle while installing the three rubber isolators following surface cleaning of all mating points. The 2.3L engine installation requires a brand-new exhaust downpipe-to-muffler and tailpipe assembly gasket but also includes exhaust downpipe-to-muffler and tailpipe assembly bolts with new flagnuts for application of 40 Nm (30 lb-ft) torque. Attach a new gasket on the RH side of the exhaust Y-pipe-to-muffler and tailpipe assembly before securing its bolts and new flagnuts with 40 Nm (30 lb-ft) torque. Finish the procedure by confirming the exhaust system isolators have no load present. Follow with the exhaust system alignment when necessary.