How to remove and replace the front bumper cover on 2008 Ford Taurus?

The procedure for front bumper cover replacement on Taurus, Sable and Taurus X vehicles requires hoisting the vehicle into neutral position. The first step requires scrivets' removal from both front bumper cover locations and subsequent front bumper bolts' extraction followed by a 6 Nm (53 lb-in) bolt torque when reinstalling all parts. The next step involves removing the six front bumper cover wheel house screws while installation requires their screws to be tight at 2 Nm (18 lb-in). Remove the electrical connectors of the fog lights together with any existing front side marker lamps. One must unclip the bumper cover from the fender while gently pulling its upper rear end to finish the complete cover removal. Check the bumper cover mounting reinforcements for damage after removal then apply new parts if necessary. The process ends by executing steps that were used to remove the components.

OEM 2008 Ford Taurus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Bumpers found

View related parts
2008 Ford Taurus Bumper Cover, Rear Part Number: 8G1Z-17K835-AAPTM
$255.12 MSRP: $397.38
You Save: $142.26 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Base No.: 17K835
- Item Weight: 13.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-17K835-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Taurus Impact Bar, Rear Part Number: 8G1Z-17906-B
$132.65 MSRP: $193.08
You Save: $60.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Replaces: 6G1Z-17906-A
- Base No.: 17906
- Item Weight: 31.00 Pounds
- Item Dimensions: 8.2 x 56.7 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-17906-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Taurus Bumper Cover, Rear Part Number: 8G1Z-17K835-CAPTM
$388.93 MSRP: $571.12
You Save: $182.19 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Base No.: 17K835
- Item Weight: 13.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-17K835-CAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Taurus Bumper Cover, Front Part Number: 8G1Z-17D957-AAPTM
$152.87 MSRP: $235.92
You Save: $83.05 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 11.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-17D957-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
2008 Ford Taurus Impact Bar, Front Part Number: 8G1Z-17757-A
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: 5G1Z-17757-AA
- Base No.: 17757
- Item Weight: 12.80 Pounds
- Item Dimensions: 6.8 x 56.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Taurus Submodels:
- Limited, SE, SEL | 6 Cyl 3.5 L GAS

2008 Ford Taurus Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Taurus Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Taurus Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Taurus Bumper Parts Q&A

Q: How to remove and replace the front bumper cover on 2008 Ford Taurus?
A: The procedure for front bumper cover replacement on Taurus, Sable and Taurus X vehicles requires hoisting the vehicle into neutral position. The first step requires scrivets' removal from both front bumper cover locations and subsequent front bumper bolts' extraction followed by a 6 Nm (53 lb-in) bolt torque when reinstalling all parts. The next step involves removing the six front bumper cover wheel house screws while installation requires their screws to be tight at 2 Nm (18 lb-in). Remove the electrical connectors of the fog lights together with any existing front side marker lamps. One must unclip the bumper cover from the fender while gently pulling its upper rear end to finish the complete cover removal. Check the bumper cover mounting reinforcements for damage after removal then apply new parts if necessary. The process ends by executing steps that were used to remove the components.