FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln Mark LT Air Bag
Air Bag Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Air Bags found
2008 Lincoln Mark LT Driver Air Bag
Part Number: 7L3Z-15043B13-DA$392.48 MSRP: $538.49You Save: $146.01 (28%)Product Specifications- Other Name: Module
- Replaces: 5L3Z-15043B13-BAA, 6L3Z-15043B13-BA
- Base No.: <043B13
- Item Weight: 4.50 Pounds
- Item Dimensions: 9.6 x 6.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-15043B13-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Module; Driver Air Bag
- Manufacturer Note: (-W*)
- Replaces: 6L3Z-15043B13-BB
- Base No.: <043B13
- Item Weight: 4.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-15043B13-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Module; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Position: Upper
- Base No.: <044A74
- Item Weight: 11.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-15044A74-DC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Module; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Manufacturer Note: (-E*)
- Position: Upper
- Base No.: <044A74
- Item Weight: 11.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-15044A74-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Module; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Manufacturer Note: (-W*)
- Position: Upper
- Base No.: <044A74
- Item Weight: 14.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-15044A74-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln Mark LT Air Bag
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Mark LT Air Bag available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Mark LT Air Bag as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln Mark LT Air Bag Parts Questions & Experts Answers
- Q: What precautions should be taken when servicing the driver air bag module on 2008 Lincoln Mark LT?A: A protective eyewear system must be used during driver air bag module service to stop potential personal injuries from occurring. It is essential to position the air bag module with the deployment door facing away from your body while always avoiding the potential deployment through placing it face down. The manual inspection of air bag module electrical connectors should be avoided because it might trigger accidental deployment which results in increased dangers of injury and death. The deployment of air bags requires replacement modules when any damage or discoloration appears on the trim covers and deployment doors. When the restraints control module (RCM) fuse is removed while the ignition switch shows an ON status the air bag warning indicator becomes visible but this normal condition indicates no fault exists within the system. All supplemental restraint system checks must show no faults or malfunctions before releasing the vehicle for sale. Reversible procedures must start by installing new components; unresolved conditions require original part reinstatement followed by a complete diagnostic procedure execution. Before installation the two bolt caps and bolts need to be tightened to 10 Nm (89 lb-in) after depowering the SRS system. To accomplish this procedure disconnect the horn switch and both black and gray electrical connectors while removing the module partially from the steering wheel. Install the driver air bag module by precisely positioning its unique electrical connectors correctly into the keyway without using force since any damage could occur. Position the module while making sure electrical wires stay clear of any trapping mechanisms before connecting the horn switch to the both electrical connectors. You should install two bolts then tighten them to 10 Nm (89 lb-in) before adding bolt caps and activating the SRS system power.
Related 2008 Lincoln Mark LT Parts
2008 Lincoln Mark LT Air Bag Control Module
2008 Lincoln Mark LT Air Bag Sensor
2008 Lincoln Mark LT Antenna Cable
2008 Lincoln Mark LT Brake Light Switch
2008 Lincoln Mark LT Clock Spring
2008 Lincoln Mark LT Cylinder Head Temperature Sensor
2008 Lincoln Mark LT Ignition Lock Cylinder
2008 Lincoln Mark LT Knock Sensor
2008 Lincoln Mark LT Parking Assist Distance Sensor
2008 Lincoln Mark LT Relay
2008 Lincoln Mark LT TPMS Sensor
2008 Lincoln Mark LT Turn Signal Switch