FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln Mark LT Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Alternator found
2008 Lincoln Mark LT Alternator Part Number: 7L3Z-10346-FRM
$261.58 MSRP: $418.18You Save: $156.60 (38%)Product Specifications- Other Name: Re-Manufactured Alternator Assembly
- Replaces: 7L3Z-10346-AARM, 7L3Z-10346-CRM, 7L3Z-10346-A, GL-8863-RM, 7L3Z-10346-ARM, GL-922, GL-974-RM, GL-8743-RM
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-10346-FRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln Mark LT Alternator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Mark LT Alternator available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Mark LT Alternator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln Mark LT Alternator Parts Q&A
- Q: How to service the alternator on 2008 Lincoln Mark LT?A: A service operation of the alternator needs users to start by disconnecting the battery. The first step for a 4.6L engine model involves air cleaner outlet pipe removal and the removal of air cleaner inlet pipe is required for 5.4L engine models. The rotation of the front end accessory drive (FEAD) belt tensioner in a clockwise direction results in the placement of the FEAD belt aside. Unfasten the generator harness locator from the generator bracket before removing its four bolts that need tightening to 10 Nm (89 lb-in) when reattaching the bracket. Prior to disconnecting the generator's electric cables make sure you tighten its bolts at 25 Nm (18 lb-ft) during reinstallation. Time to disconnect the electrical connector and place the generator B+ protective boot aside before removing the B+ nut and terminal from the generator to take it out for reinstallation with an 8 Nm (71 lb-in) torque setting on the B+ nut. The complete installation process ends with performing the reverse steps from removal.