How to Service the Crankshaft Position Sensor on 2008 Lincoln Mark LT?

The first step to servicing the crankshaft position (CKP) sensor requires a vehicle in neutral gear position while hanging from a hoist. Rotate the accessory drive belt clockwise while you detach it from the A/C compressor pulley. A sufficient amount of bolt loosening enables the compressor to move downward 25 mm (1 inch) for sensor access. First disconnect the electrical connector of the CKP sensor and then proceed to remove its securing bolt to extract the sensor. The proper torque for the CKP sensor bolt should be set to 10 Nm (89 lb-in) while the A/C compressor bolts must be tightened to 25 Nm (18 lb-ft). Lubricate the O-ring with clean engine oil after which you should reinsert it during the installation process.

OEM 2008 Lincoln Mark LT Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2008 Lincoln Mark LT Crankshaft Position Sensor
Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27
You Save: $24.16 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS

2008 Lincoln Mark LT Crankshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Mark LT Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Mark LT Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Mark LT Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to Service the Crankshaft Position Sensor on 2008 Lincoln Mark LT?
A: The first step to servicing the crankshaft position (CKP) sensor requires a vehicle in neutral gear position while hanging from a hoist. Rotate the accessory drive belt clockwise while you detach it from the A/C compressor pulley. A sufficient amount of bolt loosening enables the compressor to move downward 25 mm (1 inch) for sensor access. First disconnect the electrical connector of the CKP sensor and then proceed to remove its securing bolt to extract the sensor. The proper torque for the CKP sensor bolt should be set to 10 Nm (89 lb-in) while the A/C compressor bolts must be tightened to 25 Nm (18 lb-ft). Lubricate the O-ring with clean engine oil after which you should reinsert it during the installation process.