OEM 2007 Lincoln Mark LT Crankshaft Position Sensor

2007 Lincoln Mark LT Crankshaft Position Sensor Parts Questions & Experts Answers

• Q: How to Service the Crankshaft Position Sensor on 2007 Lincoln Mark LT?

  A: Vehicle servicing for the crankshaft position (CKP) sensor begins with placing the vehicle in neutral gear position and hoisting it in the air. The first step involves belt removal of the accessory drive. The power steering fluid cooler requires removal after two bolts are removed from its placement. The access to the CKP sensor requires sliding the A/C compressor down by 25 mm (1 in) after sufficiently loosening its bolts. The first step in servicing a CKP sensor involves disconnecting its electrical connector followed by unbolting and removing the sensor. Before placing the new sensor into position apply clean engine oil to the O-ring seal and fasten the bolt to 10 Nm (89 lb-in). The installation process begins with tightening the A/C compressor bolts to 25 Nm (18 lb-ft) before reinstalling and ending with repositioning the power steering fluid cooler while securing its bolts to 11 Nm (8 lb-ft). To finalize the build follow the opposite steps used during removal.